SN74ACT573DBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ACT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 12.5 ns |
| Turn On Delay Time | 6 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT573DBR Overview
A package called 20-SSOP (0.209, 5.30mm Width) contains it. A Cut Tape (CT) package is used to package it. It is configured with an output of Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. This electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V, it operates. The temperature at which the machine is operating is -40°C~85°C. It is a type of FPGA belonging to the 74ACT series. The electronic part in this image has 8 bits. In this device, there are 20 terminations that have been designed. There is no doubt that it belongs to the family 74ACT573. The supply voltage of the device is 5V. There are 20 pins on it. There is a device in this electronic family called ACT. This board has 20 pins on it, which is what it is designed for. The electronic part is mounted using the Surface Mount method. In this device, there is a total of 2 ports available for use. The part is in the FF/Latches subcategory. A total of 5V power supplies are needed to run it. In the circuit, there are 3 input lines that are constituted by an electronic circuit. The device's reliable performance makes it a good choice for TR. Its 24mA output current allows for maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. Maximum power supply (ICC) for its operation is 0.04mA.
SN74ACT573DBR Features
20-SSOP (0.209, 5.30mm Width) package
74ACT series
8 Bits
74ACT573 family
20 pin count
20 pins
5V power supplies
SN74ACT573DBR Applications
There are a lot of Texas Instruments SN74ACT573DBR Latches applications.
- General-Purpose Register
- Bus system register with enable parallel lines at bus side
- Address register
- Decade counting
- Decade counting 7-segment decimal display
- Automotive Infotainment
- Network Switches
- Shift left register
- Counter
- Up/down difference counting
