Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Weight |
500.709277mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74ACT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
BROADSIDE VERSION OF 373 |
Subcategory |
FF/Latches |
Technology |
CMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
74ACT573 |
Pin Count |
20 |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Number of Circuits |
8 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
4μA |
Output Current |
24mA |
Number of Bits |
8 |
Propagation Delay |
12.5 ns |
Turn On Delay Time |
6 ns |
Family |
ACT |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
24mA 24mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.024 A |
Control Type |
ENABLE LOW |
Power Supply Current-Max (ICC) |
0.04mA |
Number of Input Lines |
9 |
Independent Circuits |
1 |
Count Direction |
UNIDIRECTIONAL |
Height |
2.65mm |
Length |
12.8mm |
Width |
7.5mm |
Thickness |
2.35mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74ACT573DW Overview
In the 20-SOIC (0.295, 7.50mm Width) package, it can be found as an embedded module. This package has the format of Tube. It uses the output configuration Tri-State. D-Type Transparent Latch is the logic type of this electrical device. The electronic component is mounted according to the Surface Mount method. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. There is a temperature of -40°C~85°C at which the system operates. It is a type of FPGA belonging to the 74ACT series. The design of this electronic part is based on 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This type belongs to the 74ACT573 family. The device is operated when the supply voltage is set to 5V. With 20 pins, it is equipped. It is part of the family of electronic devices called ACT. The pin configuration of the device is 20. The electronic part is mounted in a way that corresponds to Surface Mount. 2 ports are available on this device. This part can be found within the FF/Latches subcategory. 5V power supplies are needed to operate it. Electronic circuits are represented by 9 input lines. With 24mA, maximum design flexibility is ensured. High efficiency requires maintaining the supply voltage at 5V. In order to achieve its superior flexibility, 8 circuits are used. In addition, BROADSIDE VERSION OF 373 characterize it. There is a limit on the maximal power current (ICC) supplied by the device for operation that reaches 0.04mA.
SN74ACT573DW Features
20-SOIC (0.295, 7.50mm Width) package
74ACT series
8 Bits
74ACT573 family
20 pin count
20 pins
5V power supplies
SN74ACT573DW Applications
There are a lot of Texas Instruments SN74ACT573DW Latches applications.
- Decade counting
- Pseudo-random code generators
- Data acquisition
- Decade counting 7-segment decimal display
- BCD counting
- Buffer register
- Hammer Device Information
- Sample and hold register
- Parallel data storage
- Programmable binary