SN74ACT573DWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 10.5 ns |
| Turn On Delay Time | 6 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.024 A |
| High Level Output Current | -24mA |
| Low Level Output Current | 32mA |
| Independent Circuits | 1 |
| Height | 2.35mm |
| Length | 12.8mm |
| Width | 7.52mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74ACT573DWG4 Overview
A package called SOIC contains it. It is packaged in the way of Rail/Tube. With this electronic part, there are 8 bits. This device is designed with 20 terminations. A 5V voltage supply is required for operation. With 20 pins, it is equipped. There is a device in this electronic family called ACT. 20 pins are used in its design. Surface Mount is the method used for mounting this electronic part. As far as ports are concerned, this device has 2 ports. There is a subcategory of FF/Latches for this part. 5V power supplies are needed to operate it. High efficiency requires a voltage supply of 5V. The superior flexibility of the system is achieved through its use of 8 circuits. There is also BROADSIDE VERSION OF 373 characteristics to it. 32mA is the low level output current. It is set to zero for the high level output current. It is recommended to work at a temperature lower than 85°C. A temperature greater than -40°C should be used for operation. It is capable of providing a maximum supply voltage of 5.5V. The minimal voltage for operation is 4.5V. As far as the logic IC is concerned, it uses BUS DRIVER. Due to its 24mA output current, it offers maximum design flexibility.
SN74ACT573DWG4 Features
SOIC package
8 Bits
20 pin count
20 pins
5V power supplies
SN74ACT573DWG4 Applications
There are a lot of Texas Instruments SN74ACT573DWG4 Latches applications.
- Meter applications
- Shift register
- High-speed logic
- Double bus register system
- Ring counter
- Buffer register
- Counter
- Stacked or Push-Down Registers
- Automotive ADAS
- Parallel data storage
