banner_page

SN74ACT573N

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ACT Series 74ACT573 20 Pins DUAL CMOS 20-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ACT573N
  • Package: 20-DIP (0.300, 7.62mm)
  • Datasheet: -
  • Stock: 232
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ACT Series 74ACT573 20 Pins DUAL CMOS 20-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Weight 1.1991g
Operating Temperature -40°C~85°C
Packaging Tube
Series 74ACT
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Termination Through Hole
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Base Part Number 74ACT573
Pin Count 20
Output Voltage 5.5V
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5V
Number of Circuits 8
Load Capacitance 50pF
Number of Ports 2
Output Current 24mA
Number of Bits 8
Propagation Delay 12.5 ns
Turn On Delay Time 6 ns
Family ACT
Logic Function D-Type, Latch
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.024 A
Control Type ENABLE LOW
Power Supply Current-Max (ICC) 0.04mA
Number of Input Lines 3
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 5.08mm
Length 24.33mm
Width 6.35mm
Thickness 4.57mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case 20-DIP (0.300, 7.62mm)
Number of Pins 20

SN74ACT573N Overview


In the package 20-DIP (0.300, 7.62mm), it can be found. This package has the format of Tube. The output it is configured with uses Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. The way in which this electronic part is mounted is Through Hole. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. The 74ACT series contains FPGAs of this type. With this electronic part, there are 8 bits. This device has been designed with 20 terminations available. 74ACT573 is its family. With the supply voltage set at 5V, it is able to operate. The device is equipped with 20 pins. ACT is the family of this electronic device. The pin configuration of the device is 20. The electronic part is mounted in a way that corresponds to Through Hole. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Subcategory FF/Latches contains this part. There are 5V power supplies attached to it. There are electronic circuits attached to the 3 input lines. With 24mA, maximum design flexibility is ensured. High efficiency requires a supply voltage of 5V. Its superior flexibility is achieved by using 8 circuits. When the maximum power current (ICC) is supplied for its operation, it reaches 0.04mA.

SN74ACT573N Features


20-DIP (0.300, 7.62mm) package
74ACT series
8 Bits
74ACT573 family
20 pin count
20 pins
5V power supplies

SN74ACT573N Applications


There are a lot of Texas Instruments SN74ACT573N Latches applications.

  • Lamp and Display (LED)
  • Communication systems
  • Parallel Input
  • Registers
  • Buffer Storage
  • Shift left register
  • Counter timers
  • Automotive Infotainment
  • Accumulator Registers
  • Audio and video switching

Write a review

Note: HTML is not translated!
    Bad           Good