SN74ACT573NSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 12.5 ns |
| Turn On Delay Time | 6 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2mm |
| Length | 12.6mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT573NSR Overview
20-SOIC (0.209, 5.30mm Width) contains it. A package of Tape & Reel (TR) has been used. It uses Tri-State as the output. There is a logic type of D-Type Transparent Latch for this electrical device. The electronic component is mounted according to the Surface Mount method. With a supply voltage of 4.5V~5.5V, it operates. During operation, the temperature is set at -40°C~85°C. An FPGA in this series belongs to the 74ACT family. There are 8 bits in this electronic part. This device is designed with 20 terminations. It belongs to 74ACT573 family. In order to operate it, the supply voltage must be 5V. There are 20 pins on it. In the world of electronics, this electronic device belongs to the family of ACT. The device has 20 pins. Surface Mount is the way in which this electronic part is mounted. This device has a total of 2 ports. It belongs to the subcategory of FF/Latches. A total of 5V power supplies are needed to run it. In the circuit, there are 8 input lines that are constituted by an electronic circuit. Based on its reliable performance, this device is well suited to TR. Its 24mA output current allows for maximum design flexibility. A high level of efficiency is achieved by maintaining the supply voltage at 5V. In order to operate properly, its maximum power current (ICC) should be 0.04mA.
SN74ACT573NSR Features
20-SOIC (0.209, 5.30mm Width) package
74ACT series
8 Bits
74ACT573 family
20 pin count
20 pins
5V power supplies
SN74ACT573NSR Applications
There are a lot of Texas Instruments SN74ACT573NSR Latches applications.
- Counters
- Shift right register
- A/D converters
- Automotive ADAS
- Relay
- Double bus register system
- Sample and hold register
- Hammer Device Information
- Pattern generators
- Frequency dividing
