SN74ACT573NSRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ACT573 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 10.5 ns |
| Turn On Delay Time | 6 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2mm |
| Length | 12.6mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT573NSRE4 Overview
In the package 20-SOIC (0.209, 5.30mm Width), it can be found. The package is in the form of Tape & Reel (TR). In its configuration, Tri-State is used as the output. The Logic type of this electrical device is D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. With a supply voltage of 4.5V~5.5V, it operates. It is -40°C~85°C at the operating temperature. 74ACT is the series number of this FPGA. There are 8 bits in this electronic part. This device has 20 terminations. As a member of the 74ACT573 family, it falls under that category. The device works with a voltage of 5V for its supply voltage. With 20 pins, it is equipped. There is a device in this electronic family called ACT. This board has 20 pins on it, which is what it is designed for. Surface Mount is the method used for mounting this electronic part. In this device, there is a total of 2 ports available for use. In the subcategory FF/Latches, this part belongs. 5.5V is the maximum voltage (Vsup) that can be supplied. The system is powered by 5V sources. A voltage greater than 4.5V must be supplied as a power supply (Vsup). There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. On the basis of its reliability, this device is well suited for TR. Its output current of 24mA ensures maximum design flexibility. When the maximum power current (ICC) is supplied for its operation, it reaches 0.04mA.
SN74ACT573NSRE4 Features
20-SOIC (0.209, 5.30mm Width) package
74ACT series
8 Bits
74ACT573 family
20 pin count
20 pins
5V power supplies
SN74ACT573NSRE4 Applications
There are a lot of Texas Instruments SN74ACT573NSRE4 Latches applications.
- Shift left with parallel loading
- Display driver
- Display
- Automotive Infotainment
- A/D and D/A conversion
- Up/down difference counting
- Ring counter
- Decade counting 7-segment decimal display
- Multi-line decoders
- Registers
