banner_page

SN74ACT573PW

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ACT Series 74ACT573 20 Pins DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ACT573PW
  • Package: 20-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 697
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ACT Series 74ACT573 20 Pins DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Output Current 24mA
Number of Bits 8
Propagation Delay 12.5 ns
Turn On Delay Time 6 ns
Family ACT
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 24mA 24mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.024 A
Control Type ENABLE LOW
Power Supply Current-Max (ICC) 0.04mA
Number of Input Lines 8
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 1.2mm
Length 6.5mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-TSSOP (0.173, 4.40mm Width)
Number of Pins 20
Weight 76.997305mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 74ACT
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number 74ACT573
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5V
Load Capacitance 50pF
Number of Ports 2

SN74ACT573PW Overview


There is an embedded version of it in package 20-TSSOP (0.173, 4.40mm Width). This package has the format of Tube. Tri-State is the output configured for it. In this electrical device, the logic type is D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. A 4.5V~5.5V supply voltage is required to operate it. There is -40°C~85°C operating temperature. 74ACT is the series number of this FPGA. The electronic part in this image has 8 bits. In this device, there are 20 terminations. It is a member of the 74ACT573 family. It operates with a supply voltage of 5V. There are 20 pins attached to it. ACT is the family name of this electronic device. In addition, it is designed with a pin number of 20. A Surface Mount mounting method has been used for this electronic part. As far as ports are concerned, this device has 2 ports. The part is in the FF/Latches subcategory. There are 5V power supplies attached to it. There are 8 input lines in which electronic circuits are present. Its 24mA output current allows for maximum design flexibility. High efficiency requires a supply voltage of 5V. As its maximal power current (ICC) reaches 0.04mA, it is able to operate.

SN74ACT573PW Features


20-TSSOP (0.173, 4.40mm Width) package
74ACT series
8 Bits
74ACT573 family
20 pin count
20 pins
5V power supplies

SN74ACT573PW Applications


There are a lot of Texas Instruments SN74ACT573PW Latches applications.

  • Counter timers
  • Automotive Body Electronics
  • Decade counting
  • Serial Output Register
  • Relay
  • Parallel-to-Serial Data Conversion
  • Parallel data storage
  • Serial Input
  • Shift register
  • Shift right register

Write a review

Note: HTML is not translated!
    Bad           Good