banner_page

SN74ACT573PWG4

D-Type, Latch 8 Bits Latches 20 Pins DUAL CMOS TSSOP


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ACT573PWG4
  • Package: TSSOP
  • Datasheet: PDF
  • Stock: 901
  • Description: D-Type, Latch 8 Bits Latches 20 Pins DUAL CMOS TSSOP(Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case TSSOP
Number of Pins 20
Weight 76.997305mg
Packaging Rail/Tube
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory FF/Latches
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Pin Count 20
Operating Supply Voltage 5V
Polarity Non-Inverting
Power Supplies 5V
Temperature Grade INDUSTRIAL
Number of Circuits 8
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Load Capacitance 50pF
Number of Ports 2
Current - Output 24mA
Number of Bits 8
Propagation Delay 12.5 ns
Turn On Delay Time 6 ns
Family ACT
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
Max I(ol) 0.024 A
High Level Output Current -24mA
Low Level Output Current 24mA
Independent Circuits 1
Height 1.15mm
Length 6.5mm
Width 4.4mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

SN74ACT573PWG4 Overview


In the package TSSOP, it can be found. Packaged in the way of Rail/Tube. An electronic part with 8 bits is designed. In this device, there are 20 terminations. With the supply voltage set at 5V, it is able to operate. With 20 pins, it is equipped. This electronic device is categorized as a ACT electronic device. The device has 20 pins. Mounting this electronic component follows the Surface Mount method. This device is equipped with 2 ports. The part belongs to the FF/Latches subcategory. There are 5V power supplies attached to it. High efficiency requires maintaining the supply voltage at 5V. 8 circuits are used to provide this superior level of flexibility. There is 24mA low level output current set. -24mA is set as the high level output current. It is recommended that the operating temperature not exceed 85°C. It is recommended to operate at a temperature higher than -40°C. The supply voltage is limited to 5.5V. A minimal voltage of 4.5V is needed to operate it. BUS DRIVER is the logic IC it uses. As the output current is 24mA, the design flexibility is maximum.

SN74ACT573PWG4 Features


TSSOP package
8 Bits
20 pin count
20 pins
5V power supplies

SN74ACT573PWG4 Applications


There are a lot of Texas Instruments SN74ACT573PWG4 Latches applications.

  • Hammer
  • Digital bus buffer
  • Decade counting 7-segment decimal display
  • Hammer Device Information
  • Multi-line decoders
  • Accumulator Registers
  • Parallel Input
  • High-speed logic
  • Parallel data storage
  • Data acquisition

Write a review

Note: HTML is not translated!
    Bad           Good