SN74ACT573PWR
| Parameters | |
|---|---|
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ACT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 50mA |
| Number of Bits | 8 |
| Propagation Delay | 12.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 6 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
SN74ACT573PWR Overview
The 20-TSSOP (0.173, 4.40mm Width) package contains it. Tape & Reel (TR) is the way in which it is packaged. It uses Tri-State as the output. D-Type Transparent Latch is the logic type of this electrical device. Surface Mount is used to mount this electronic part. It operates with a supply voltage of 4.5V~5.5V. During operation, the temperature is set at -40°C~85°C. The 74ACT series is associated with this FPGA. The electronic part in this image has 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. The family it belongs to is 74ACT573. With a supply voltage of 5V, it operates. 20 pins are available on it. There is a device in this electronic family called ACT. The device has 20 pins. Surface Mount is the way in which this electronic part is mounted. 2 ports are available on this device. In the subcategory FF/Latches, this part belongs. The system is powered by 5V sources. An electronic circuit can be found on 3 input lines. Based on its reliable performance, this device is appropriate for TR. Its 50mA output current allows for maximum design flexibility. A high level of efficiency is achieved by maintaining the supply voltage at 5V. It consumes 4μA current from its quiescent state without being affected by external factors at all. When the maximum power current (ICC) is supplied for its operation, it reaches 0.04mA.
SN74ACT573PWR Features
20-TSSOP (0.173, 4.40mm Width) package
74ACT series
8 Bits
74ACT573 family
20 pin count
20 pins
5V power supplies
SN74ACT573PWR Applications
There are a lot of Texas Instruments SN74ACT573PWR Latches applications.
- Shift left with parallel loading
- Control circuits
- Timers
- Watches
- Four-bit storage with output enable
- Lamp and Display (LED)
- Motor Drives
- Accumulator Registers
- Data acquisition
- Automotive Body Electronics
