SN74ACT573PWRE4
| Parameters | |
|---|---|
| Turn On Delay Time | 6 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74ACT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 8 |
| Propagation Delay | 12.5 ns |
SN74ACT573PWRE4 Overview
There is an embedded version of it in package 20-TSSOP (0.173, 4.40mm Width). Tape & Reel (TR) is the way it is packaged. It uses Tri-State as its output configuration. D-Type Transparent Latch is the logic type of this electrical device. Electronic parts are mounted in accordance with Surface Mount. A 4.5V~5.5V supply voltage is required to operate it. It operates at -40°C~85°C degrees Celsius. The 74ACT series contains FPGAs of this type. An electronic part with 8 bits is designed. A device such as this has 20 terminations designed. 74ACT573 is its family. The supply voltage of the device is 5V. 20 pins are provided. ACT is the family name of this electronic device. The 20 pins are designed into it. It is mounted according to the Surface Mount method. This device has a total of 2 ports. There is a subcategory of FF/Latches for this part. There is 5V power supply for it. There are electronic circuits attached to the 8 input lines. Based on its reliable performance, this device is suitable for TR. With 24mA, maximum design flexibility is ensured. The supply voltage should be maintained at 5V for high efficiency. Maximum power supply (ICC) for its operation is 0.04mA.
SN74ACT573PWRE4 Features
20-TSSOP (0.173, 4.40mm Width) package
74ACT series
8 Bits
74ACT573 family
20 pin count
20 pins
5V power supplies
SN74ACT573PWRE4 Applications
There are a lot of Texas Instruments SN74ACT573PWRE4 Latches applications.
- Storage
- Programmable binary
- Phase comparator
- OC-48 communication systems
- Hammer
- Buffer Storage
- TV Set-top Boxes
- Buffer/Storage Registers
- General-Purpose Register
- Frequency
