SN74ACT574NG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACT |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ACT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 110MHz |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| RoHS Status | ROHS3 Compliant |
SN74ACT574NG4 Overview
20-DIP (0.300, 7.62mm)is the packaging method. D flip flop is embedded in the Tube package. T flip flop uses Tri-State, Non-Invertedas the output. It is configured with a trigger that uses a value of Positive Edge. This electronic part is mounted in the way of Through Hole. The JK flip flop operates at a voltage of 4.5V~5.5V. A temperature of -40°C~85°C TAis considered to be the operating temperature. D-Typedescribes this flip flop. In FPGA terms, D flip flop is a type of 74ACTseries FPGA. It should not exceed 110MHzin its output frequency. D latch consists of 1 elements. During its operation, it consumes 4μA quiescent energy. The 74ACT574family includes it. There is 4.5pF input capacitance for this T flip flop.
SN74ACT574NG4 Features
Tube package
74ACT series
SN74ACT574NG4 Applications
There are a lot of Texas Instruments SN74ACT574NG4 Flip Flops applications.
- Communications
- Frequency Dividers
- Data storage
- Divide a clock signal by 2 or 4
- Supports Live Insertion
- Common Clocks
- Convert a momentary switch to a toggle switch
- Test & Measurement
- Cold spare funcion
- Load Control
