SN74ACT74DE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ACT74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 210MHz |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 5.5 ns |
| Family | ACT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT74DE4 Overview
The item is packaged in 14-SOIC (0.154, 3.90mm Width)cases. The Tubepackage contains it. The output it is configured with uses Differential. It is configured with a trigger that uses a value of Positive Edge. There is an electric part mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. In the operating environment, the temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. The FPGA belongs to the 74ACT series. Its output frequency should not exceed 210MHz Hz. During its operation, it consumes 2μA quiescent energy. Terminations are 14. You can search similar parts based on 74ACT74. It is powered by a voltage of 5V . Its input capacitance is 3pF farads. Electronic devices of this type belong to the ACTfamily. There is an electronic component mounted in the way of Surface Mount. There are 14pins on it. It has a clock edge trigger type of Positive Edge. It is included in FF/Latches. The superior flexibility of this circuit is achieved by using 2 circuits. A total of 5V power supplies are needed to run it. In order to ensure high efficiency, the supply voltage should remain at 5V. Its output current of 24mAallows for maximum design flexibility. A total of 4input lines have been provided.
SN74ACT74DE4 Features
Tube package
74ACT series
14 pins
5V power supplies
SN74ACT74DE4 Applications
There are a lot of Texas Instruments SN74ACT74DE4 Flip Flops applications.
- ESD protection
- Individual Asynchronous Resets
- Automotive
- CMOS Process
- 2 – Bit synchronous counter
- EMI reduction circuitry
- Safety Clamp
- Data storage
- Frequency Dividers
- Balanced Propagation Delays
