SN74ACT74DRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latch |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 210MHz |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 5.5 ns |
| Family | ACT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT74DRE4 Overview
In the form of 14-SOIC (0.154, 3.90mm Width), it has been packaged. The package Tape & Reel (TR)contains it. There is a Differentialoutput configured with it. There is a trigger configured with Positive Edge. The electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. The operating temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. JK flip flop belongs to the 74ACTseries of FPGAs. Its output frequency should not exceed 210MHz. There is 2μA quiescent consumption. Currently, there are 14 terminations. The object belongs to the 74ACT74 family. It is powered by a voltage of 5V . Input capacitance of this device is 3pF farads. A device of this type belongs to the family of ACT. There is an electronic part that is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 14. This device exhibits a clock edge trigger type of Positive Edge. It is part of the FF/Latchbase part number family. In order to achieve its superior flexibility, 2 circuits are used. On the basis of its reliable performance, this D flip flop is well suited for use with TR. It runs on 5Vvolts of power. For high efficiency, the supply voltage should be set to 5V. The output current of 24mA makes it feature maximum design flexibility. Currently, there are 4 input lines present.
SN74ACT74DRE4 Features
Tape & Reel (TR) package
74ACT series
14 pins
5V power supplies
SN74ACT74DRE4 Applications
There are a lot of Texas Instruments SN74ACT74DRE4 Flip Flops applications.
- Digital electronics systems
- Latch
- Frequency Divider circuits
- ESD protection
- Load Control
- Buffer registers
- Instrumentation
- Communications
- Divide a clock signal by 2 or 4
- Data Synchronizers
