SN74ACT74DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 210MHz |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 5.5 ns |
| Family | ACT |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT74DRG4 Overview
The flip flop is packaged in a case of 14-SOIC (0.154, 3.90mm Width). The Tape & Reel (TR)package contains it. T flip flop uses Differentialas the output. Positive Edgeis the trigger it is configured with. Surface Mountis occupied by this electronic component. With a supply voltage of 4.5V~5.5V volts, it operates. In this case, the operating temperature is -40°C~85°C TA. D-Typeis the type of this D latch. The 74ACTseries comprises this type of FPGA. You should not exceed 210MHzin the output frequency of the device. As a result, it consumes 2μA quiescent current. Currently, there are 14 terminations. The 74ACT74family includes it. Power is provided by a 5V supply. Its input capacitance is 3pF farads. It belongs to the family of electronic devices known as ACT. In this case, the electronic component is mounted in the way of Surface Mount. The 14pins are designed into the board. There is a clock edge trigger type of Positive Edgeon this device. The part you are looking for is included in FF/Latches. The superior flexibility of this circuit is achieved by using 2 circuits. Due to its reliability, this T flip flop is well suited for TR. There are 5V power supplies attached to it. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. It offers maximum design flexibility with its output current of 24mA. In order to operate, the chip has 1 output lines.
SN74ACT74DRG4 Features
Tape & Reel (TR) package
74ACT series
14 pins
5V power supplies
SN74ACT74DRG4 Applications
There are a lot of Texas Instruments SN74ACT74DRG4 Flip Flops applications.
- CMOS Process
- Supports Live Insertion
- Clock pulse
- Frequency Divider circuits
- Automotive
- Load Control
- Event Detectors
- Common Clocks
- Registers
- Frequency Dividers
