SN74ACT74MDREP
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | DUMMY VAL |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74ACT74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 24mA |
| Clock Frequency | 210MHz |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 5.5 ns |
| Family | ACT |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 1 |
| fmax-Min | 85 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 85000000Hz |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
SN74ACT74MDREP Overview
14-SOIC (0.154, 3.90mm Width)is the way it is packaged. D flip flop is embedded in the Tape & Reel (TR) package. The output it is configured with uses Differential. It is configured with a trigger that uses Positive Edge. It is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. Currently, the operating temperature is -55°C~125°C TA. This D latch has the type D-Type. This type of FPGA is a part of the 74ACT series. Its output frequency should not exceed 210MHz. There is 2μA quiescent consumption. The number of terminations is 14. The 74ACT74 family contains it. Power is supplied from a voltage of 5V volts. Its input capacitance is 3pFfarads. Electronic devices of this type belong to the ACTfamily. Electronic part Surface Mountis mounted in the way. It is designed with 14 pins. Its clock edge trigger type is Positive Edge. The part is included in FF/Latches. Its superior flexibility is attributed to its use of 2 circuits. Due to its reliability, this T flip flop is well suited for TR. An electrical current of 5V volts is applied to it. For high efficiency, the supply voltage should be set to 5V. Its output current of 24mAallows for maximum design flexibility. There are 1 output lines in this JK flip flop. There is also a characteristic of DUMMY VAL.
SN74ACT74MDREP Features
Tape & Reel (TR) package
74ACT series
14 pins
5V power supplies
SN74ACT74MDREP Applications
There are a lot of Texas Instruments SN74ACT74MDREP Flip Flops applications.
- Computers
- Clock pulse
- Memory
- EMI reduction circuitry
- Buffer registers
- Control circuits
- Balanced Propagation Delays
- Frequency division
- Circuit Design
- Patented noise
