SN74ACT74NG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACT |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ACT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Clock Frequency | 210MHz |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| RoHS Status | ROHS3 Compliant |
SN74ACT74NG4 Overview
The flip flop is packaged in 14-DIP (0.300, 7.62mm). It is included in the package Tube. T flip flop uses Differentialas the output. JK flip flop uses Positive Edgeas the trigger. There is an electronic component mounted in the way of Through Hole. A 4.5V~5.5Vsupply voltage is required for it to operate. The operating temperature is -40°C~85°C TA. This D latch has the type D-Type. In terms of FPGAs, it belongs to the 74ACT series. Its output frequency should not exceed 210MHz. The list contains 2 elements. There is a consumption of 2μAof quiescent energy. Members of the 74ACT74family make up this object. There is 3pF input capacitance for this T flip flop.
SN74ACT74NG4 Features
Tube package
74ACT series
SN74ACT74NG4 Applications
There are a lot of Texas Instruments SN74ACT74NG4 Flip Flops applications.
- Latch
- Buffer registers
- Memory
- Automotive
- Frequency Divider circuits
- ESD performance
- CMOS Process
- Computers
- ESCC
- Patented noise
