SN74ACT7803-25DL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Frequency | 40MHz |
| Base Part Number | 74ACT7803 |
| Function | Synchronous |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Memory Size | 9K 512 x 18 |
| Element Configuration | Dual |
| Nominal Supply Current | 400μA |
| Max Supply Current | 400μA |
| Access Time | 15ns |
| Data Bus Width | 18b |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Density | 9 kb |
| Standby Current-Max | 0.0004A |
| Parallel/Serial | PARALLEL |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Width |
| Height | 2.79mm |
| Length | 18.41mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT7803-25DL Overview
You can find FIFO memory chip in package 56-BSSOP (0.295, 7.50mm Width) .There is a case Tube in which it is packaged.Data and applications can be stored in the FIFO chip's 9K 512 x 18 memory.Regulating the temperature to 0°C~70°C ensures reliable operation.The mounting type of the FIFO memory is Surface Mount .For operation, a voltage of 4.5V~5.5V is used.The 74ACT series is represented by this memory logic.It is recommended that memory IC be mounted in the Surface Mount direction.Memory IC belongs to the 74ACT7803 family.When the supply voltage is 5V there is the possibility of high efficiency.FIFO means contains a total of 56 terminations.The operation pins are 56 pins.In order for FIFO design to operate, a maximum current of 400μA is required.A 5V supply voltage will ensure FIFO's maximum efficiency.A self-contained gadget is contained within FIFOs .In this part, the memory type is OTHER FIFO .It is capable of maintaining good accuracy with a frequency of 40MHz .The component normally owns 5V power supplies.Through the use of 2 circuits, FIFO memory chip is able to achieve enhanced flexibility.
SN74ACT7803-25DL Features
9K 512 x 18 memory size
74ACT series
Best part number of 74ACT7803
FIFOs category
SN74ACT7803-25DL Applications
There are a lot of Texas Instruments SN74ACT7803-25DL FIFOs Memory applications.
- Analog-to-digital converters
- Data
- Computers
- SPD for DDR3 Memory Modules
- Programmable Logic Controller
- TVs
- Communications
- Industrial Systems
- Communications Systems
- Tape controllers
