SN74ACT7804-20DL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Frequency | 50MHz |
| Base Part Number | 74ACT7804 |
| Function | Asynchronous |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Memory Size | 9K 512 x 18 |
| Element Configuration | Dual |
| Nominal Supply Current | 400μA |
| Max Supply Current | 400μA |
| Access Time | 15ns |
| Data Bus Width | 18b |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Density | 9 kb |
| Parallel/Serial | PARALLEL |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Width |
| Height | 2.59mm |
| Length | 18.54mm |
| Width | 7.59mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT7804-20DL Overview
FIFO memory chip can be found in the 56-BSSOP (0.295, 7.50mm Width) package.It's packaged in the shape of a Tube .It is possible to store data and applications on the FIFO chips as they have 9K 512 x 18 in their memory.It is recommended that the temperature be regulated to 0°C~70°C to ensure reliable operation.There is a mounting type of Surface Mount on the FIFO memory.A 4.5V~5.5V supply voltage is required to power it.It belongs to the 74ACT series of memory logics.A Surface Mount mounting method is recommended.In terms of its family, it is part of the 74ACT7804 family.With a supply voltage of 5V volts, high efficiency is possible.FIFO consists of 56 terminations, which indicates that FIFO means is empty.56 pins are used for operation.FIFO design requires a maximum current of 400μA to operate.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.It is self-contained in FIFOs .It has a type OTHER FIFO memory IC.With a frequency of 50MHz , it exhibits good accuracy.Normally, the component owns 5V power supplies.By using 2 circuitry, FIFO memory chip has enhanced flexibility.
SN74ACT7804-20DL Features
9K 512 x 18 memory size
74ACT series
Best part number of 74ACT7804
FIFOs category
SN74ACT7804-20DL Applications
There are a lot of Texas Instruments SN74ACT7804-20DL FIFOs Memory applications.
- Communications Systems
- Computer Systems
- Network switching/routing
- PC peripheral
- Emulators
- Temporary storage elements
- SPI Bus Flash Memory Devices
- Test site
- Extended product life cycle
- Laser Receiver System
