SN74ACT7804-25DL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74ACT7804 |
| Function | Asynchronous |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Memory Size | 9K 512 x 18 |
| Element Configuration | Dual |
| Nominal Supply Current | 400μA |
| Max Supply Current | 400μA |
| Clock Frequency | 40MHz |
| Access Time | 18ns |
| Data Rate | 40MHz |
| Data Bus Width | 18b |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Memory Width | 18 |
| Density | 9 kb |
| Parallel/Serial | PARALLEL |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Width |
| Length | 18.415mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT7804-25DL Overview
FIFO memory chip is contained in the 56-BSSOP (0.295, 7.50mm Width) package.In terms of packaging, it comes in Tube cases.The FIFO chips have a memory of 9K 512 x 18 that can be used to store applications and data.It is recommended that the temperature be regulated to 0°C~70°C to ensure reliable operation.The FIFO memory's mounting type is Surface Mount .For operation, a voltage of 4.5V~5.5V is used.The 74ACT series comprises this memory logic.The recommended mounting method for this FIFO products is Surface Mount .The 74ACT7804 family of integers consists of this type.Supply voltages of 5V are capable of achieving high efficiency.As a result of this, FIFO means contains 56 terminations.These are the 56 pins for operation.For its operation, 400μA is the maximum current required.For FIFO's maximum efficiency, the supply voltage should be set to 5V .This gadget is self-contained in?FIFOs .The IC of the part is OTHER FIFO memory type.A component normally has 5V power supplies attached to it.FIFO memory ICs run at a frequency of 40MHz .Due to the use of 2 circuits, FIFO memory chip has an enhanced level of flexibility.
SN74ACT7804-25DL Features
9K 512 x 18 memory size
74ACT series
Best part number of 74ACT7804
FIFOs category
Clock frequency of 40MHz
SN74ACT7804-25DL Applications
There are a lot of Texas Instruments SN74ACT7804-25DL FIFOs Memory applications.
- Battery Charger
- Medical Monitoring Device
- SPD for DDR3 Memory Modules
- Alarm System
- Video time base correction
- One assembly
- Signal processing
- Controlled baseline
- Look-up Tables
- HDD
