SN74ACT7804-40DLR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Frequency | 25MHz |
| Base Part Number | 74ACT7804 |
| Function | Asynchronous |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Memory Size | 9K 512 x 18 |
| Element Configuration | Dual |
| Nominal Supply Current | 400μA |
| Max Supply Current | 400μA |
| Access Time | 20ns |
| Data Bus Width | 18b |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Memory Width | 18 |
| Density | 9 kb |
| Parallel/Serial | PARALLEL |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Width |
| Cycle Time | 40 ns |
| Length | 18.415mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT7804-40DLR Overview
FIFO memory chip is included in the 56-BSSOP (0.295, 7.50mm Width) package.In terms of packaging, it comes in Tape & Reel (TR) cases.Data and applications can be stored in the FIFO chip's 9K 512 x 18 memory.To ensure reliable operation, the temperature should be regulated to 0°C~70°C .The mounting type of the FIFO memory is Surface Mount .For operation, a voltage of 4.5V~5.5V is used.The 74ACT series comprises this memory logic.Mounting it Surface Mount is recommended.In addition, it is among the members of the 74ACT7804 family.A supply voltage of 5V allows for high efficiency.56 terminations are contained in FIFO means.There are 56 pins on the operation pins.For its operation, 400μA is the maximum current required.For FIFO's maximum efficiency, the supply voltage should be set to 5V .A self-contained gadget is contained in FIFOs .In this part, the memory type is OTHER FIFO .In spite of the frequency 25MHz , it is capable of maintaining a good level of accuracy.It is normal for a component to be equipped with 5V power supplies.By using 2 circuitry, FIFO memory chip has enhanced flexibility.
SN74ACT7804-40DLR Features
9K 512 x 18 memory size
74ACT series
Best part number of 74ACT7804
FIFOs category
SN74ACT7804-40DLR Applications
There are a lot of Texas Instruments SN74ACT7804-40DLR FIFOs Memory applications.
- Optical memories
- Video Processing
- SPI Bus Flash Memory Devices
- Consumer Systems
- Measurement Equipment
- Disk Controllers
- Game Controller
- Networking
- Signal processing
- Smart Meter
