SN74ACT7805-15DL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Frequency | 67MHz |
| Base Part Number | 74ACT7805 |
| Function | Synchronous |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Memory Size | 4.5K 256 x 18 |
| Element Configuration | Dual |
| Nominal Supply Current | 400μA |
| Max Supply Current | 400μA |
| Access Time | 12ns |
| Data Bus Width | 18b |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Memory Width | 18 |
| Density | 4.5 kb |
| Standby Current-Max | 0.0004A |
| Parallel/Serial | PARALLEL |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Width |
| Length | 18.415mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74ACT7805-15DL Overview
56-BSSOP (0.295, 7.50mm Width) is the package in which FIFO memory chip is contained.It comes in a Tube package.Data and applications can be stored in the FIFO chip's 4.5K 256 x 18 memory.Reliable operation requires a temperature of 0°C~70°C .The FIFO memory's mounting type is Surface Mount .A supply voltage of 4.5V~5.5V is required for its operation.It is a member of the 74ACT series .Memory IC's recommended mounted way is Surface Mount .In addition, it is among the members of the 74ACT7805 family.A supply voltage of 5V allows for high efficiency.FIFO means contains a total of 56 terminations.56 pin is used for operation.In order to operate FIFO design, a maximum current of 400μA is required.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.In FIFOs , this gadget is self-contained.A OTHER FIFO type memory IC is present in the FIFO memory chip.When the frequency is set to 67MHz , the system can maintain good accuracy.A component normally has 5V power supplies attached to it.With 2 circuits, FIFO memory chip offers enhanced flexibility.
SN74ACT7805-15DL Features
4.5K 256 x 18 memory size
74ACT series
Best part number of 74ACT7805
FIFOs category
SN74ACT7805-15DL Applications
There are a lot of Texas Instruments SN74ACT7805-15DL FIFOs Memory applications.
- Game Consoles
- Extended product life cycle
- GPS Offender Tracking
- MP3 Interface for Automobile
- Down-Hole Energy Drilling
- Smart Meter
- Rate buffers
- Fabrication Site
- Tape controllers
- Controlled baseline
