banner_page

SN74ACT7805-20DLR

56 Terminations56 Pin 74ACT7805 FIFO memory IC74ACT Series 4.5K 256 x 1813ns


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ACT7805-20DLR
  • Package: 56-BSSOP (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 675
  • Description: 56 Terminations56 Pin 74ACT7805 FIFO memory IC74ACT Series 4.5K 256 x 1813ns (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 56-BSSOP (0.295, 7.50mm Width)
Number of Pins 56
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
Series 74ACT
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 56
ECCN Code EAR99
HTS Code 8542.32.00.71
Subcategory FIFOs
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Supply Voltage 5V
Terminal Pitch 0.635mm
Base Part Number 74ACT7805
Function Synchronous
Current - Supply (Max) 400μA
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 5V
Supply Voltage-Min (Vsup) 4.5V
Memory Size 4.5K 256 x 18
Clock Frequency 50MHz
Access Time 13ns
Data Rate 50MHz
Output Characteristics 3-STATE
Memory Width 18
Standby Current-Max 0.0004A
Memory Density 4608 bit
Parallel/Serial PARALLEL
Memory IC Type OTHER FIFO
Bus Directional Uni-Directional
Retransmit Capability No
Programmable Flags Support Yes
Output Enable YES
Expansion Type Width
Cycle Time 20 ns
Height Seated (Max) 2.79mm
Length 18.415mm
Width 7.5mm
RoHS Status ROHS3 Compliant

SN74ACT7805-20DLR Overview


FIFO memory chip is included in the 56-BSSOP (0.295, 7.50mm Width) package.There's a Tape & Reel (TR) on the package.The FIFO chips have a memory of 4.5K 256 x 18 that can be used to store applications and data.It is recommended that the temperature be kept at 0°C~70°C to ensure reliable operation.It is mounted in the Surface Mount position.For operation, a voltage of 4.5V~5.5V is used.It belongs to the 74ACT series of memory logics.A FIFO's maximum operating supply current of 400μA is available.Memory IC's recommended mounted way is Surface Mount .Memory IC is a member of the 74ACT7805 family.With a supply voltage of 5V volts, high efficiency is possible.The number of terminations in FIFO means is 56 .56 pin is used for operation.The gadget in FIFOs is self-contained.There is a memory type OTHER FIFO in the IC of this part.Normally, 5V power supplies are owned by the component.There is a FIFO memory IC's maximum supply voltage of 5.5V .Ideally, the supply voltage (Vsup) should stay above 4.5V .The FIFO memory IC's clock runs at a frequency of 50MHz .

SN74ACT7805-20DLR Features


4.5K 256 x 18 memory size
74ACT series
Best part number of 74ACT7805
FIFOs category
Clock frequency of 50MHz

SN74ACT7805-20DLR Applications


There are a lot of Texas Instruments SN74ACT7805-20DLR FIFOs Memory applications.

  • Signal processing
  • TVs
  • Computers
  • High-speed disk
  • Extended product life cycle
  • Laser Receiver System
  • Computer Systems
  • SPI Bus Flash Memory Devices
  • Communications Systems
  • Buses

Write a review

Note: HTML is not translated!
    Bad           Good