SN74ACT7806-25DL
| Parameters | |
|---|---|
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Memory Size | 4.5K 256 x 18 |
| Element Configuration | Dual |
| Max Supply Current | 400μA |
| Clock Frequency | 40MHz |
| Access Time | 18ns |
| Data Rate | 40MHz |
| Data Bus Width | 18b |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Memory Width | 18 |
| Density | 4.5 kb |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Width |
| Length | 18.415mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74ACT7806 |
| Function | Asynchronous |
SN74ACT7806-25DL Overview
You will find FIFO memory chip in the 56-BSSOP (0.295, 7.50mm Width) package.In this case, it is packaged in case number Tube .There is a memory of 4.5K 256 x 18 available for storing data and applications.The temperature should be adjusted to 0°C~70°C in order to ensure reliable operation.There is Surface Mount mounting type for this FIFO memory.A voltage supply of 4.5V~5.5V is needed to operate it.The 74ACT series is represented by this memory logic.The recommended mounting way is Surface Mount .A member of the 74ACT7806 family, it has the following characteristics.With a supply voltage of 5V volts, high efficiency is possible.A total of 56 terminations can be found in FIFO means.The operation pins are 56 pins.In order for FIFO design to operate, a maximum current of 400μA is required.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.In FIFOs , this gadget is self-contained.ICs of type OTHER FIFO are used in the FIFO memory chip.Normally, 5V power supplies are owned by the component.The FIFO memory IC runs at a frequency of 40MHz .Through the use of 2 circuits, FIFO memory chip is able to achieve enhanced flexibility.
SN74ACT7806-25DL Features
4.5K 256 x 18 memory size
74ACT series
Best part number of 74ACT7806
FIFOs category
Clock frequency of 40MHz
SN74ACT7806-25DL Applications
There are a lot of Texas Instruments SN74ACT7806-25DL FIFOs Memory applications.
- Data-acquisition systems
- SPD for DDR3 Memory Modules
- MP3 Interface for Automobile
- GPS Offender Tracking
- Buses
- SPI Bus Flash Memory Devices
- Multi-stage synchronizer
- IP Radio
- Network bridges
- Test Equipment
