SN74ACT7813-15DLR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Frequency | 67MHz |
| Base Part Number | 74ACT7813 |
| Function | Synchronous |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Memory Size | 1.125K 64 x 18 |
| Element Configuration | Dual |
| Nominal Supply Current | 400μA |
| Max Supply Current | 400μA |
| Access Time | 12ns |
| Data Bus Width | 18b |
| Direction | Bidirectional |
| Organization | 64X18 |
| Output Characteristics | 3-STATE |
| Memory Width | 18 |
| Density | 1.1 kb |
| Standby Current-Max | 0.0004A |
| Parallel/Serial | PARALLEL |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Width |
| Cycle Time | 15 ns |
| Length | 18.415mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74ACT7813-15DLR Overview
The 56-BSSOP (0.295, 7.50mm Width) package contains FIFO memory chip.You'll find it packaged in the shape of a Tape & Reel (TR) .There is a memory of 1.125K 64 x 18 available for storing data and applications.To ensure reliable operation, the temperature should be regulated to 0°C~70°C .The mounting type of the FIFO memory is Surface Mount .To operate, the FIFO products requires a voltage supply of 4.5V~5.5V .It is a component from the 74ACT series.A Surface Mount mounting method is recommended.This object belongs to the family 74ACT7813 .When the supply voltage is 5V , high efficiency is possible.A total of 56 terminations can be found in FIFO means.These are the 56 pins for operation.FIFO requires a minimum of 400μA current to operate.For FIFO's maximum efficiency, the supply voltage should be set to 5V .The gadget is self-contained and can be found in FIFOs .In this part, the memory type is OTHER FIFO .A frequency of 67MHz is sufficient to maintain good accuracy.Normaly, the component is powered by 5V power supplies.By using 2 circuitry, FIFO memory chip has enhanced flexibility.
SN74ACT7813-15DLR Features
1.125K 64 x 18 memory size
74ACT series
Best part number of 74ACT7813
FIFOs category
SN74ACT7813-15DLR Applications
There are a lot of Texas Instruments SN74ACT7813-15DLR FIFOs Memory applications.
- Fabrication Site
- General Data Collection Applications at Extreme High-Temperatures
- Data
- Emulators
- Rate buffers
- Queues for communication systems
- Industrial Systems
- Cardiac Monitoring Device
- Game Controller
- Transistors
