SN74ACT7813-20DL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Frequency | 50MHz |
| Base Part Number | 74ACT7813 |
| Function | Synchronous |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Memory Size | 1.125K 64 x 18 |
| Element Configuration | Dual |
| Nominal Supply Current | 400μA |
| Max Supply Current | 400μA |
| Access Time | 13ns |
| Data Bus Width | 18b |
| Direction | Bidirectional |
| Organization | 64X18 |
| Output Characteristics | 3-STATE |
| Density | 1.1 kb |
| Standby Current-Max | 0.0004A |
| Parallel/Serial | PARALLEL |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Width |
| Height | 2.79mm |
| Length | 18.41mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT7813-20DL Overview
You will find FIFO memory chip in the 56-BSSOP (0.295, 7.50mm Width) package.The package comes in a case of Tube .It is possible to store data and applications on the FIFO chips as they have 1.125K 64 x 18 in their memory.The temperature should be kept at 0°C~70°C to ensure reliable operation.It is mounted in the Surface Mount position.For operation, a voltage of 4.5V~5.5V is used.It belongs to the 74ACT series of memory logics.Mounting it in the Surface Mount way is recommended.Memory IC belongs to the family of 74ACT7813 .An input voltage of 5V results in high efficiency.The number of terminations in FIFO means is 56 .The operation pins are 56 pins.In order for FIFO design to operate, a maximum current of 400μA is required.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.The gadget is self-contained and can be found in FIFOs .In this part, the memory type is OTHER FIFO .In the presence of a 50MHz frequency, it can maintain good accuracy.The component normally owns 5V power supplies.Using 2 circuits gives FIFO memory chip enhanced flexibility.
SN74ACT7813-20DL Features
1.125K 64 x 18 memory size
74ACT series
Best part number of 74ACT7813
FIFOs category
SN74ACT7813-20DL Applications
There are a lot of Texas Instruments SN74ACT7813-20DL FIFOs Memory applications.
- Consumer Systems
- Event Recorder
- Data communications
- Consumer
- HDD
- Desktop Computers
- Communications
- Temporary storage elements
- Signal processing
- SPI Bus Flash Memory Device
