SN74ACT7813-20DLR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74ACT7813 |
| Function | Synchronous |
| Current - Supply (Max) | 400μA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Memory Size | 1.125K 64 x 18 |
| Clock Frequency | 50MHz |
| Access Time | 13ns |
| Data Rate | 50MHz |
| Organization | 64X18 |
| Output Characteristics | 3-STATE |
| Memory Width | 18 |
| Standby Current-Max | 0.0004A |
| Memory Density | 1152 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Width |
| Cycle Time | 20 ns |
| Height Seated (Max) | 2.79mm |
| Length | 18.415mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
SN74ACT7813-20DLR Overview
FIFO memory chip can be found in the 56-BSSOP (0.295, 7.50mm Width) package.In terms of packaging, it comes in Tape & Reel (TR) cases.The FIFO chips have a memory of 1.125K 64 x 18 that can be used to store applications and data.It is recommended that the temperature of the system be regulated to 0°C~70°C for reliable operation.There is Surface Mount mounting type for this FIFO memory.To operate, the FIFO products requires a voltage supply of 4.5V~5.5V .The 74ACT series includes this memory logic.It has a maximum operating supply current of 400μA .Memory IC's recommended mounted way is Surface Mount .In terms of its family, it is part of the 74ACT7813 family.With a supply voltage of 5V volts, high efficiency is possible.In FIFO means, there are 56 terminations.56 pins are used for operation.A self-contained gadget is contained within FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.Normally, the component owns 5V power supplies.As a result, Vsup is set at 5.5V (FIFO memory IC's maximum voltage supply).Keep the supply voltage (Vsup) above 4.5V for normal operation.The clock of the FIFO memory IC runs at 50MHz frequency.
SN74ACT7813-20DLR Features
1.125K 64 x 18 memory size
74ACT series
Best part number of 74ACT7813
FIFOs category
Clock frequency of 50MHz
SN74ACT7813-20DLR Applications
There are a lot of Texas Instruments SN74ACT7813-20DLR FIFOs Memory applications.
- Portable Information Devices
- Computer Systems
- Fabrication Site
- Extended product life cycle
- Controlled baseline
- Data communications
- Industrial Systems
- Disk Controllers
- Network bridges
- Application that requires re-writable nonvolatile parameter memory
