SN74ACT7813-25DL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Frequency | 40MHz |
| Base Part Number | 74ACT7813 |
| Function | Synchronous |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Memory Size | 1.125K 64 x 18 |
| Element Configuration | Dual |
| Nominal Supply Current | 400μA |
| Max Supply Current | 400μA |
| Access Time | 15ns |
| Data Bus Width | 18b |
| Direction | Bidirectional |
| Organization | 64X18 |
| Output Characteristics | 3-STATE |
| Memory Width | 18 |
| Density | 1.1 kb |
| Standby Current-Max | 0.0004A |
| Parallel/Serial | PARALLEL |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Width |
| Length | 18.415mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT7813-25DL Overview
FIFO memory chip is contained in the 56-BSSOP (0.295, 7.50mm Width) package.In this case, it is packaged in case number Tube .There is a 1.125K 64 x 18 MB memory on the FIFO chips, which can be used to store both applications and data.The temperature should be adjusted to 0°C~70°C in order to ensure reliable operation.Mounting type Surface Mount indicates that the FIFO memory is mounted.Powered by a voltage of 4.5V~5.5V , it operates on a low supply voltage.It is part of the 74ACT series of memory logics.A Surface Mount mounting method is recommended.The 74ACT7813 family of objects contains it.An input voltage of 5V results in high efficiency.56 terminations are contained in FIFO means.56 pins are the operation pins.The maximum current required for its operation is 400μA .The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.There is a self-contained gadget within FIFOs .It has a type OTHER FIFO memory IC.It is capable of maintaining good accuracy with a frequency of 40MHz .There are normally 5V power supplies attached to the component.By using 2 circuits, FIFO memory chip has greater flexibility.
SN74ACT7813-25DL Features
1.125K 64 x 18 memory size
74ACT series
Best part number of 74ACT7813
FIFOs category
SN74ACT7813-25DL Applications
There are a lot of Texas Instruments SN74ACT7813-25DL FIFOs Memory applications.
- Notebook
- Buses
- Desktop Computers
- Computers
- IP Camera Buffer
- Portable Information Devices
- Optical memories
- Signal processing
- Multimedia
- SPI Bus Flash Memory Devices
