SN74ACT7813-25DLR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Frequency | 40MHz |
| Base Part Number | 74ACT7813 |
| Function | Synchronous |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Memory Size | 1.125K 64 x 18 |
| Element Configuration | Dual |
| Nominal Supply Current | 400μA |
| Max Supply Current | 400μA |
| Access Time | 15ns |
| Data Bus Width | 18b |
| Direction | Bidirectional |
| Organization | 64X18 |
| Output Characteristics | 3-STATE |
| Memory Width | 18 |
| Density | 1.1 kb |
| Standby Current-Max | 0.0004A |
| Parallel/Serial | PARALLEL |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Width |
| Length | 18.415mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT7813-25DLR Overview
56-BSSOP (0.295, 7.50mm Width) is the package in which FIFO memory chip is contained.In the shape of a Tape & Reel (TR) , it's packaged.Data and applications can be stored in the FIFO chip's 1.125K 64 x 18 memory.Keeping the temperature at 0°C~70°C will ensure reliable operation.Mounting type Surface Mount indicates that the FIFO memory is mounted.A supply voltage of 4.5V~5.5V is required for its operation.It is a component from the 74ACT series.Surface Mount is memory IC's recommended mounting method.A member of the 74ACT7813 family, it has the following characteristics.When the supply voltage is 5V , high efficiency is possible.A total of 56 terminations are contained within FIFO means.There are 56 pins on the operation pins.FIFO requires a minimum of 400μA current to operate.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.The gadget is self-contained and can be found in FIFOs .This part is equipped with an IC of type OTHER FIFO memory.When the frequency is set to 40MHz it can maintain good accuracy.Normally, the component owns 5V power supplies.Using 2 circuits allows for enhanced flexibility.
SN74ACT7813-25DLR Features
1.125K 64 x 18 memory size
74ACT series
Best part number of 74ACT7813
FIFOs category
SN74ACT7813-25DLR Applications
There are a lot of Texas Instruments SN74ACT7813-25DLR FIFOs Memory applications.
- Cameras
- Game Controller
- Multimedia
- Network bridges
- Computer networks
- Disk Controllers
- Communications Systems
- Portable Information Devices
- Data communications
- Programmable Logic Controller
