banner_page

SN74ACT7813-25DLR

56 TerminationsFIFO memory IC74ACT Series 1.125K 64 x 1815ns


  • Manufacturer: Rochester Electronics, LLC
  • Nocochips NO: 699-SN74ACT7813-25DLR
  • Package: 56-BSSOP (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 596
  • Description: 56 TerminationsFIFO memory IC74ACT Series 1.125K 64 x 1815ns (Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 56-BSSOP (0.295, 7.50mm Width)
Surface Mount YES
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
Series 74ACT
JESD-609 Code e4
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 56
Terminal Finish NICKEL PALLADIUM GOLD
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Supply Voltage 5V
Terminal Pitch 0.635mm
JESD-30 Code R-PDSO-G56
Function Synchronous
Current - Supply (Max) 400μA
Qualification Status COMMERCIAL
Supply Voltage-Max (Vsup) 5.5V
Supply Voltage-Min (Vsup) 4.5V
Memory Size 1.125K 64 x 18
Access Time 15ns
Data Rate 40MHz
Organization 64X18
Memory Width 18
Memory Density 1152 bit
Parallel/Serial PARALLEL
Bus Directional Uni-Directional
Retransmit Capability No
Programmable Flags Support Yes
Output Enable YES
Expansion Type Width
Cycle Time 25 ns
Height Seated (Max) 2.79mm
Length 18.415mm
Width 7.5mm
RoHS Status ROHS3 Compliant

SN74ACT7813-25DLR Overview


FIFO memory chip is contained in the 56-BSSOP (0.295, 7.50mm Width) package.There's a Tape & Reel (TR) on the package.The FIFO chips have a memory of 1.125K 64 x 18 that can be used to store applications and data.It is advisable to regulate the temperature to 0°C~70°C to ensure reliable operation.The mounting type of the FIFO memory is Surface Mount .For operation, a voltage of 4.5V~5.5V is used.The memory logic belongs to the series 74ACT .A FIFO's maximum operating supply current of 400μA is available.When the supply voltage is 5V , high efficiency is possible.As a result of this, FIFO means contains 56 terminations.As a result, Vsup is set at 5.5V (FIFO memory IC's maximum voltage supply).Maintain the supply voltage (Vsup) above 4.5V for normal operation.

SN74ACT7813-25DLR Features


1.125K 64 x 18 memory size
74ACT series

SN74ACT7813-25DLR Applications


There are a lot of Rochester Electronics, LLC SN74ACT7813-25DLR FIFOs Memory applications.

  • Desktop Computers
  • Event Recorder
  • Telecommunication
  • Data
  • Cameras
  • Code converters
  • IP Radio
  • Microprogramming
  • Video Processing
  • SPI Bus Flash Memory Device

Write a review

Note: HTML is not translated!
    Bad           Good