banner_page

SN74ACT7814-25DLR

56 Terminations56 Pin 74ACT7814 FIFO memory IC74ACT Series 1.125K 64 x 1818ns


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74ACT7814-25DLR
  • Package: 56-BSSOP (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 486
  • Description: 56 Terminations56 Pin 74ACT7814 FIFO memory IC74ACT Series 1.125K 64 x 1818ns (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 56-BSSOP (0.295, 7.50mm Width)
Number of Pins 56
Weight 694.790113mg
Operating Temperature 0°C~70°C
Packaging Tape & Reel (TR)
Series 74ACT
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 56
ECCN Code EAR99
Subcategory FIFOs
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Supply Voltage 5V
Terminal Pitch 0.635mm
Base Part Number 74ACT7814
Function Asynchronous
Current - Supply (Max) 400μA
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 5V
Supply Voltage-Min (Vsup) 4.5V
Number of Circuits 2
Memory Size 1.125K 64 x 18
Clock Frequency 40MHz
Access Time 18ns
Data Rate 40MHz
Data Bus Width 18b
Direction Unidirectional
Organization 64X18
Output Characteristics 3-STATE
Memory Width 18
Parallel/Serial PARALLEL
Memory IC Type OTHER FIFO
Bus Directional Uni-Directional
Retransmit Capability No
Programmable Flags Support Yes
Output Enable YES
Expansion Type Width
Length 18.415mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74ACT7814-25DLR Overview


You will find FIFO memory chip in the 56-BSSOP (0.295, 7.50mm Width) package.It comes in a Tape & Reel (TR) package.There is a memory of 1.125K 64 x 18 available for storing data and applications.Keeping the temperature at 0°C~70°C will ensure reliable operation.There is a mounting type of Surface Mount on the FIFO memory.A 4.5V~5.5V supply voltage is required to power it.The 74ACT series contains this memory logic.400μA is the FIFO's maximum operating supply current.A Surface Mount mounting method is recommended.Memory IC belongs to the 74ACT7814 family.With a supply voltage of 5V volts, high efficiency is possible.In FIFO means, there are 56 terminations.There are 56 pins on the operation pins.This gadget is self-contained in?FIFOs .This part has a memory type of OTHER FIFO .A component normally has 5V power supplies attached to it.There is a FIFO memory IC's maximum supply voltage of 5.5V (Vsup).To ensure normal operation, the supply voltage should be greater than 4.5V (Vsup).A clock running at frequency 40MHz is used by the FIFO memory IC.Due to the use of 2 circuits, FIFO memory chip has an enhanced level of flexibility.

SN74ACT7814-25DLR Features


1.125K 64 x 18 memory size
74ACT series
Best part number of 74ACT7814
FIFOs category
Clock frequency of 40MHz

SN74ACT7814-25DLR Applications


There are a lot of Texas Instruments SN74ACT7814-25DLR FIFOs Memory applications.

  • Data communications
  • Smart Meter
  • Cardiac Monitoring Device
  • Temporary storage elements
  • Controlled baseline
  • Video Processing
  • Signal processing
  • Transistors
  • Test site
  • IP Camera Buffer

Write a review

Note: HTML is not translated!
    Bad           Good