SN74ACT7881-30PN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-LQFP |
| Number of Pins | 80 |
| Weight | 465.697616mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 33.4MHz |
| Base Part Number | 74ACT7881 |
| Function | Synchronous |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Memory Size | 18K 1K x 18 |
| Element Configuration | Dual |
| Nominal Supply Current | 400μA |
| Max Supply Current | 400μA |
| Access Time | 18ns |
| Data Bus Width | 18b |
| Direction | Unidirectional |
| Organization | 1KX18 |
| Output Characteristics | 3-STATE |
| Memory Width | 18 |
| Density | 18 kb |
| Standby Current-Max | 0.0004A |
| Parallel/Serial | PARALLEL |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Depth, Width |
| Cycle Time | 30 ns |
| Height Seated (Max) | 1.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74ACT7881-30PN Overview
You can find FIFO memory chip in package 80-LQFP .Tray case is used for packaging.Data and applications can be stored in the FIFO chip's 18K 1K x 18 memory.The temperature should be kept at 0°C~70°C to ensure reliable operation.There is Surface Mount mounting type for this FIFO memory.Powered by a voltage of 4.5V~5.5V , it operates on a low supply voltage.The 74ACT series includes this memory logic.Surface Mount is memory IC's recommended mounting method.Memory IC belongs to the family of 74ACT7881 .With a supply voltage of 5V volts, high efficiency is possible.80 terminations are contained in FIFO means.80 pins are used for operation.The maximum current required for its operation is 400μA .A 5V supply voltage will ensure FIFO's maximum efficiency.In FIFOs , there is a self-contained gadget.A OTHER FIFO memory type IC is used in the part.When the frequency is set to 33.4MHz , the system can maintain good accuracy.Normally, the component owns 5V power supplies.FIFO memory chip offers enhanced flexibility due to its use of 2 circuits.
SN74ACT7881-30PN Features
18K 1K x 18 memory size
74ACT series
Best part number of 74ACT7881
FIFOs category
SN74ACT7881-30PN Applications
There are a lot of Texas Instruments SN74ACT7881-30PN FIFOs Memory applications.
- Game Controller
- Smart Meter
- Medical Monitoring Device
- Test Equipment
- Multi-stage synchronizer
- Buses
- MP3 Interface for Automobile
- Test site
- Video time base correction
- Down-Hole Energy Drilling
