banner_page

SN74ACT7882-30FN

68 TerminationsFIFO memory IC74ACT Series 36K 2K x 1818ns


  • Manufacturer: Rochester Electronics, LLC
  • Nocochips NO: 699-SN74ACT7882-30FN
  • Package: 68-LCC (J-Lead)
  • Datasheet: PDF
  • Stock: 819
  • Description: 68 TerminationsFIFO memory IC74ACT Series 36K 2K x 1818ns (Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 68-LCC (J-Lead)
Surface Mount YES
Operating Temperature 0°C~70°C
Packaging Tube
Series 74ACT
JESD-609 Code e4
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 68
Terminal Finish NICKEL PALLADIUM GOLD
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position QUAD
Terminal Form J BEND
Peak Reflow Temperature (Cel) 260
Supply Voltage 5V
Terminal Pitch 1.27mm
JESD-30 Code S-PQCC-J68
Function Synchronous
Current - Supply (Max) 400μA
Qualification Status COMMERCIAL
Supply Voltage-Max (Vsup) 5.5V
Supply Voltage-Min (Vsup) 4.5V
Memory Size 36K 2K x 18
Access Time 18ns
Data Rate 33.4MHz
Organization 2KX18
Memory Width 18
Memory Density 36864 bit
Parallel/Serial PARALLEL
Bus Directional Uni-Directional
Retransmit Capability No
Programmable Flags Support Yes
Output Enable YES
Expansion Type Depth, Width
Cycle Time 30 ns
Height Seated (Max) 4.57mm
Length 24.23mm
Width 24.23mm
RoHS Status ROHS3 Compliant

SN74ACT7882-30FN Overview


You can find FIFO memory chip in the 68-LCC (J-Lead) package.It comes in a Tube package.It is possible to store data and applications on the FIFO chips as they have 36K 2K x 18 in their memory.To ensure reliable operation, the temperature should be regulated to 0°C~70°C .A mounting type of Surface Mount is associated with the FIFO memory.A voltage supply of 4.5V~5.5V is needed to operate it.A component in the 74ACT series, this is an memory logic.There is a FIFO's maximum operating supply current of 400μA .With a supply voltage of 5V volts, high efficiency is possible.As a result of this, FIFO means contains 68 terminations.There is a FIFO memory IC's maximum supply voltage of 5.5V .Maintain the supply voltage (Vsup) above 4.5V for normal operation.

SN74ACT7882-30FN Features


36K 2K x 18 memory size
74ACT series

SN74ACT7882-30FN Applications


There are a lot of Rochester Electronics, LLC SN74ACT7882-30FN FIFOs Memory applications.

  • Video Processing
  • Magnetic memories
  • SPI Bus Flash Memory Device
  • Programmable Logic Controller
  • Controlled baseline
  • Application that requires re-writable nonvolatile parameter memory
  • Tape controllers
  • General Data Collection Applications at Low-Temperatures
  • IP Radio
  • High-speed graphics pixel buffer

Write a review

Note: HTML is not translated!
    Bad           Good