SN74ACT7882-30PN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-LQFP |
| Number of Pins | 80 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 33.4MHz |
| Base Part Number | 74ACT7882 |
| Function | Synchronous |
| Current - Supply (Max) | 400μA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Memory Size | 36K 2K x 18 |
| Max Supply Current | 400μA |
| Access Time | 18ns |
| Organization | 2KX18 |
| Output Characteristics | 3-STATE |
| Memory Width | 18 |
| Memory Density | 36864 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Depth, Width |
| Cycle Time | 30 ns |
| Height Seated (Max) | 1.6mm |
| Length | 12mm |
| Width | 12mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74ACT7882-30PN Overview
FIFO memory chip can be found in the 80-LQFP package.There is a case Tray in which it is packaged.Apps and data can be stored in the 36K 2K x 18 memory of the FIFO chip.It is recommended that the temperature of the system be regulated to 0°C~70°C for reliable operation.Surface Mount is the mounting type of the FIFO memory.It uses a supply voltage of 4.5V~5.5V to operate.It is a component from the 74ACT series.There is a FIFO's maximum operating supply current of 400μA .Surface Mount is recommended as the mounting method.Memory IC belongs to the family of 74ACT7882 .Supply voltages of 5V are capable of achieving high efficiency.A total of 80 terminations are contained within FIFO means.FIFO design has 80 operation pins.In order for FIFO design to operate, FIFO design requires a maximum current of 400μA .A self-contained gadget is contained in FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.It maintains good accuracy at a 33.4MHz frequency.Normaly, the component is powered by 5V power supplies.The FIFO memory IC's maximum supply voltage is set to 5.5V .To ensure normal operation, the supply voltage should be greater than 4.5V (Vsup).
SN74ACT7882-30PN Features
36K 2K x 18 memory size
74ACT series
Best part number of 74ACT7882
FIFOs category
SN74ACT7882-30PN Applications
There are a lot of Texas Instruments SN74ACT7882-30PN FIFOs Memory applications.
- HDD
- Smart Meter
- Industrial Systems
- Cameras
- Multimedia
- Programmable Logic Controller
- Firmware loaders
- Thermal Management for DDR3 Memory Modules
- Communications
- Cardiac Monitoring Device
