SN74AHC123ADR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AHC123 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Number of Bits | 2 |
| Propagation Delay | 7.5ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 29.5 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Multivibrator |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | Monostable |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.008 A |
| Power Supply Current-Max (ICC) | 0.04mA |
| Schmitt Trigger Input | Yes |
| Number of Data/Clock Inputs | 2 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC123ADR Overview
In this case, the product is packaged in a 16-SOIC (0.154, 3.90mm Width) case.The equipment should be packed in case of Cut Tape (CT), so that it can be used in an emergency.Multivibrator is recommended that you use a Surface Mount mounting type for Multivibrator.As part of the logic type, Monostable is included.The vote is delivered within the zone 2V~5.5V.This electrical component is included in the 74AHC series.Multivibrator is recommended that this part does not operate at a minimum temperature of -40°C~85°C.A low current is output from the device 8mA 8mA, whereas a high voltage output is output from the device 8mA 8mA.As far as the design is concerned, the component is based on the 74AHC123 family of components.The total number of terminations of this device is 16.Voltages in the 3.3V range can be handled.As well as having 2 inputs for clocks and data, it also has a 2 output.As a whole, there are ten 16 pins on this part.There is a AHC/VHC/H/U/V family member.Multivibrator is possible to mount 16 pins on this part if you wish.As shown in the picture, Surface Mount is mounting the device.The minimum supply voltage must be greater than 2V in order to ensure that the supply voltage exceeds 2V.As a result, quiescent current is consumed at 4μA.The operating supply voltage for the chip is specified as 5V volts.There is a limit on the amount of output current that can be provided to the device, which is called 8mA.There are 2 bits on an IC chip, and they total up to the total amount of bits.Using 0.04mA is recommended for power supply current.Packaged by TR is the part.In terms of circuitry, the device is equipped with 2 circuits.
SN74AHC123ADR Features
in 16-SOIC (0.154, 3.90mm Width) package
Mounting Type: Surface Mount
Logic Type: Monostable
Operating Temperature: 74AHC
based on 74AHC123
Supply Voltage: 3.3V
Quiescent Current at 4μA
output current at 8mA
2 bits
SN74AHC123ADR Applications
There are a lot of Texas Instruments SN74AHC123ADR applications of multivibrators.
- Embedded PCs
- Digital Video Cameras (DVC)
- Puls delay and timing
- Personal Digital Assistant (PDA)
- Frequency division
- Blu-ray Players and Home Theaters
- Video Analytics Servers
- Mobile Internet Devices
- Digital Radio and Internet Radio Players
- Server PSU
