SN74AHC123AMDREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AHC123 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Number of Bits | 2 |
| Propagation Delay | 7.5ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 29.5 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Multivibrator |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | Monostable |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.008 A |
| Power Supply Current-Max (ICC) | 0.04mA |
| Schmitt Trigger Input | Yes |
| Number of Data/Clock Inputs | 2 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC123AMDREP Overview
In this case, the product is packaged in a 16-SOIC (0.154, 3.90mm Width) case.Multivibrator is recommended that you pack the equipment in case of Tape & Reel (TR).Multivibrator is recommended to mount Multivibrator on a Surface Mount-axis.As part of the logic type, Monostable is included.Multivibrator is provided in a quantMultivibratory of 2V~5.5V.There is an electrical component included in the 74AHC series.Unless otherwise specified, this part must operate at no lower than -55°C~125°C degrees Celsius.There is a small current output of 8mA 8mA while there is a large voltage output from 8mA 8mA.As far as the design is concerned, the component is based on the 74AHC123 family of components.Total 16 terminations are present.3.3V voltage can be handled by it.There are 2 inputs for data and clock.As a whole, there are ten 16 pins on this part.The AHC/VHC/H/U/V family is responsible for it.Multivibrator is possible to mount 16 pins on this part if you wish.The device is mounted by Surface Mount.A minimum supply voltage greater than 2V is required to ensure that the supply voltage is greater than 2V.During quiescent time, it consumes current at 4μA.There is a 5V volt specification for the chip's operating supply voltage.There is a limit on the amount of output current that can be provided to the device, which is called 8mA.IC chips contain 2 bits in total.There are 2 elements in it.Under 0.04mA, it is recommended to run the power supply current.As far as packaging is concerned, TR is responsible.
SN74AHC123AMDREP Features
in 16-SOIC (0.154, 3.90mm Width) package
Mounting Type: Surface Mount
Logic Type: Monostable
Operating Temperature: 74AHC
based on 74AHC123
Supply Voltage: 3.3V
Quiescent Current at 4μA
output current at 8mA
2 bits
SN74AHC123AMDREP Applications
There are a lot of Texas Instruments SN74AHC123AMDREP applications of multivibrators.
- GPS: Personal Navigation Devices
- Digital Video Cameras (DVC)
- Digital Radio and Internet Radio Players
- Frequency multiplication
- Solid-State Drive (SSD): Client and Enterprise
- Puls delay and timing
- Video Analytics Servers
- Timing clrcults
- Blu-ray Players and Home Theaters
- Server PSU
