SN74AHC126N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AHC126 |
| Pin Count | 14 |
| Output Type | 3-State |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Propagation Delay | 7.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 15 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Buffer, Inverting |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | Buffer, Non-Inverting |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Prop. Delay@Nom-Sup | 8.5 ns |
| Control Type | ENABLE HIGH |
| Number of Output Lines | 4 |
| Count Direction | UNIDIRECTIONAL |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC126N Overview
Logical driver uses a neat 14-DIP (0.300, 7.62mm) package. Tube external packaging. Available in Through Hole. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 2V~5.5V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 8mA 8mA. Logical driver can deal with 3-State output (s). Digital buffer is one of the 74AHC series devices. 14 terminations with different functions. Buffer IC reuqires a supply voltage of 3.3V. Electronic parts from the AHC/VHC/H/U/V family are used in this part. 14 pins are set with the electric part. Buffer IC is suitable for Through Hole applications. Logical driver has 14 pins. Enhanced with 2 ports. The bus transceiver employs 1 bits for each element. You can search "74AHC126" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE HIGH control technology. In quiescent state, the electronic part uses 4μA. It is recommended to use a 2/5.5V power supply. To supply the device, a minimum voltage of 2V is a must. 4 channels for high quality communication. Wireless transceiver is able to output 4 lines. The typical output current of the logical driver is measured 8mA.
SN74AHC126N Features
Bus Driver/Transceivers
SN74AHC126N Applications
There are a lot of Texas Instruments SN74AHC126N Buffers & Transceivers applications.
- Wireless modems
- Vehicle, ship, aircraft navigation and positioning
- IP cameras
- Mainframes, workstations or storage devices
- Changeing the frequency from IF to RF
- Sensor reporting
- transmission relay
- Relays
- Clock radio
- Fiber distributed data interface (FDDI)
