Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Weight |
141.690917mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74AHC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Decoder/Demultiplexer |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Decoder/Drivers |
Max Power Dissipation |
600mW |
Technology |
CMOS |
Voltage - Supply |
2V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Base Part Number |
74AHC138 |
Pin Count |
16 |
Number of Outputs |
8 |
Circuit |
1 x 3:8 |
Polarity |
Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
2/5.5V |
Supply Voltage-Min (Vsup) |
2V |
Number of Circuits |
1 |
Load Capacitance |
50pF |
Number of Bits |
8 |
Propagation Delay |
13 ns |
Quiescent Current |
4μA |
Turn On Delay Time |
18.5 ns |
Family |
AHC/VHC/H/U/V |
Logic Function |
Decoder, Demultiplexer |
Number of Inputs |
3 |
Current - Output High, Low |
8mA 8mA |
Supply Type |
Single |
Bandwidth |
110MHz |
Max I(ol) |
0.05 A |
Power Supply Current-Max (ICC) |
0.04mA |
Voltage Supply Source |
Single Supply |
Input Conditioning |
STANDARD |
Height |
1.75mm |
Length |
9.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74AHC138D Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 16-SOIC (0.154, 3.90mm Width).As a result, it is packaged in a way that is referred to as Tube.For mounting, digital switch ic uses the method Surface Mount.Decoder/Demultiplexer is the analog IC that the multiplexers uses.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2V~5.5V, designers have superior flexibility.With the 74AHC series, the multiplexers are suitable for a diverse range of applications.As part of its basic configuration, 16 terminations are designed as a part of it.There is a base part number 74AHC138 that can be used to locate signal switch's related components as well.The turn signal switch is supplied with a voltage of 3.3V volts.This turn signal switch consists of 16 component pins.As the end of conductors, it uses GULL WING.As a type of supply, Single is employed.The board has 16 pins configured.The mounting point is Surface Mount.There is a family of AHC/VHC/H/U/V members.There are 8 bits in signal multiplexer.It is recommended that the minimum supply voltage (Vsup) be kept at 2V so that unnecessary failures can be prevented.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 5.5V.During mux switch's normal operation, 2/5.5V is provided with a power supply.The turn signal switch has 8 outputs designed for operation.Part number Decoder/Drivers indicates that the digital switch ic is an electronic part.Without external influences, it consumes 4μA current of multiplexer ic.This multiplexer has a total of 3 inputs.1 circuits are formed for the normal operation of the digitalswitch.
SN74AHC138D Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 2/5.5V
SN74AHC138D Applications
There are a lot of Texas Instruments SN74AHC138D Signal Switches / Multiplexers / Decoders applications.
- To select different devices in microprocessor input
- Idle motor
- PCIe
- Decimal decoder
- Electronic circuits
- Time division multiplexing system
- Home automation system
- Make half adder
- Memory chips
- Steel plants