SN74AHC138DBR

16 Terminations2V~5.5V 16 Pin 74AHC138 Signal switch74AHC Series 8 Outputs1 Functions

Manufacturer: Texas Instruments
Nocochips NO: 815-SN74AHC138DBR
Package: 16-SSOP (0.209, 5.30mm Width)
Datasheet: -
Stock: 472
Description: 16 Terminations2V~5.5V 16 Pin 74AHC138 Signal switch74AHC Series 8 Outputs1 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SSOP (0.209, 5.30mm Width)
Number of Pins	16
Weight	128.593437mg
Operating Temperature	-40°C~85°C
Packaging	Cut Tape (CT)
Series	74AHC
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Type	Decoder/Demultiplexer
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Decoder/Drivers
Packing Method	TR
Technology	CMOS
Voltage - Supply	2V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.3V
Terminal Pitch	0.65mm
Base Part Number	74AHC138
Pin Count	16
Number of Outputs	8
Circuit	1 x 3:8
Polarity	Inverting
Supply Voltage-Max (Vsup)	5.5V
Power Supplies	2/5.5V
Supply Voltage-Min (Vsup)	2V
Number of Circuits	1
Load Capacitance	50pF
Power Dissipation	600mW
Number of Bits	8
Propagation Delay	18.5 ns
Quiescent Current	4μA
Turn On Delay Time	18.5 ns
Family	AHC/VHC/H/U/V
Logic Function	Decoder, Demultiplexer
Number of Inputs	3
Current - Output High, Low	8mA 8mA
Supply Type	Single
Bandwidth	110MHz
Max I(ol)	0.05 A
Power Supply Current-Max (ICC)	0.04mA
Voltage Supply Source	Single Supply
Input Conditioning	STANDARD
Height	2mm
Length	6.2mm
Width	5.3mm
Thickness	1.95mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74AHC138DBR Overview

The reason it is provided is that the board space can be saved by placing digital switch in the 16-SSOP (0.209, 5.30mm Width).As a result, it is packaged in a way that is referred to as Cut Tape (CT).Surface Mount is the mounting method digital switch ic uses.A digital IC Decoder/Demultiplexer is used as the analog component of the multiplexers.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.Designers have greater flexibility when digital controlled switch operates at a 2V~5.5V supply voltage.The multiplexers from 74AHC series can be used for a wide range of applications.The basic configuration of this system includes 16 terminations.There is a base part number of 74AHC138 which can also be used in order to locate the logic switch that are related to this item.In this case, 3.3V is the voltage supplied to the multiplexer's system.Signal switch has 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.This supply type employs Single.It is configured with 16 pins.It is mounted in the way of Surface Mount.The logic switch is included into the family of AHC/VHC/H/U/V.The multiplexer ic provides 8 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2V so that unnecessary failures can be prevented.The maximal supply voltage (Vsup) should be kept at 5.5V to avoid some unnecessary failures.Normally, 2/5.5V is powered by a battery.In order for the turn signal switch to work, there are 8 outputs.In electronic terms, the digital switch ic is classified as part number Decoder/Drivers.Without external influences, it consumes 4μA current of multiplexer ic.In this multiplexer, there is a total of 3 inputs.A TR packaging method is used in the switches.To operate the digitalswitch normally, 1 circuits are formed.