SN74AHC138PWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Decoder/Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Pin Count | 16 |
| Number of Elements | 1 |
| Polarity | Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 13 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 18.5 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Decoder, Demultiplexer |
| Supply Type | Single |
| Bandwidth | 110MHz |
| Logic IC Type | OTHER DECODER/DRIVER |
| High Level Output Current | -8mA |
| Low Level Output Current | 8mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 8 |
| Input Conditioning | STANDARD |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74AHC138PWG4 Overview
The reason it is provided is that the board space can be saved by placing digital switch in the TSSOP.The package is packaged in the manner of Rail/Tube.Among its basic configurations are 16 terminations.The multiplexer's system is powered by 3.3V voltage.This turn signal switch has 16 component pins.It employs GULL WING as the point at which conductors come to an end.Single is used as its supply type.Currently, it is configured with a 16 pin configuration.Multiplexer ics are mounted in the direction of Surface Mount.Among the family of AHC/VHC/H/U/V the logic switch is a member.Part number Decoder/Drivers indicates that the digital switch ic is an electronic part.Not being affected by the external factors, consumes 4μA current of multiplexer ic.To accept voltage levels, the multiplexers have3 input lines.A signal source is provided by 8 output lines.The maximum temperature for this signal switch is 85°C.In order to maintain a minimal operating temperature of the multiplexer, it should be set at -40°C.Device specifications specify 5.5V as the maximum supply voltage for the signal switches.According to its specifications, the digital swith requires a minimum supply voltage of 2V.There are 1 elements used for the mux switch configuration.In order to implement its logic, it makes use of IC OTHER DECODER/DRIVER.
SN74AHC138PWG4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
3 input lines
8 output lines
OTHER DECODER/DRIVER as the logic IC
SN74AHC138PWG4 Applications
There are a lot of Texas Instruments SN74AHC138PWG4 Signal Switches / Multiplexers / Decoders applications.
- Enabling block of memory depending on address in memory chips
- Memory chips
- CPU memory location identification
- LVDS
- Injectors
- Encrypted communications system
- Robotic vehicles
- Steel plants
- HDMI applications
- Data communication
