Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TFSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Weight |
41.900595mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Cut Tape (CT) |
Series |
74AHC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Type |
Decoder/Demultiplexer |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Decoder/Drivers |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3.3V |
Base Part Number |
74AHC139 |
Pin Count |
16 |
Number of Outputs |
4 |
Circuit |
1 x 2:4 |
Polarity |
Inverting |
Supply Voltage-Max (Vsup) |
5.5V |
Supply Voltage-Min (Vsup) |
2V |
Number of Circuits |
2 |
Load Capacitance |
50pF |
Power Dissipation |
600mW |
Number of Bits |
4 |
Throw Configuration |
DP4T |
Propagation Delay |
16.5 ns |
Quiescent Current |
4μA |
Turn On Delay Time |
16.5 ns |
Family |
AHC/VHC/H/U/V |
Logic Function |
Decoder, Demultiplexer |
Current - Output High, Low |
8mA 8mA |
Supply Type |
Single |
Bandwidth |
110MHz |
Max I(ol) |
0.05 A |
Prop. Delay@Nom-Sup |
10.5 ns |
Voltage Supply Source |
Single Supply |
Input Conditioning |
STANDARD |
Height |
1.2mm |
Length |
3.6mm |
Width |
4.4mm |
Thickness |
1.05mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
SN74AHC139DGVR Overview
In order to save board space, digital switch is located in the 16-TFSOP (0.173, 4.40mm Width).Cut Tape (CT) represents its packaging.Mounting is performed using Surface Mount.the multiplexers uses an analog IC Decoder/Demultiplexer.By maintaining the operating temperature at -40°C~125°C, turn signal switch will not be affected by external factors.Using a 2V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers from the 74AHC series can be used in a wide range of applications.There is a design for terminating 16 as part of its basic configuration.The base part number is 74AHC139, so you can find its logic switch related parts using that number.The multiplexer's system is powered by 3.3V volts.This turn signal switch consists of 16 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.The supply type of this multiplexer ic is Single.A total of 16 pins are configured on this board.It is mounted in the way of Surface Mount.There is a family of AHC/VHC/H/U/V members.There are 4 bits signal multiplexer provides.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 2V.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V in order to prevent some unnecessary failures.The turn signal switch contains 4 outputs designed to operate.Part number Decoder/Drivers indicates that the digital switch ic is an electronic part.Despite not interacting with external factors, it consumes 4μA current of multiplexer ic.The switches package is packaged in accordance with the TR method.2 circuits are formed for the normal operation of the digitalswitch.
SN74AHC139DGVR Features
Supplied in the 16-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
SN74AHC139DGVR Applications
There are a lot of Texas Instruments SN74AHC139DGVR Signal Switches / Multiplexers / Decoders applications.
- Analog, digital or video signal switching
- Data communication
- Speed synchronization of multiple motors in industries
- Make full adder
- Recording transmission
- Telephone network
- LVDS
- To select different task for memory in microprocessor memory systems
- Enabling different functions units in microprocessor instruction decoding
- Data collection system