SN74AHC157PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AHC157 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Power Dissipation | 2.3W |
| Number of Bits | 2 |
| Throw Configuration | DPST |
| Propagation Delay | 8.4 ns |
| Family | AHC/VHC/H/U/V |
| Number of Inputs | 8 |
| Current - Output High, Low | 8mA 8mA |
| Supply Type | Single |
| Bandwidth | 110MHz |
| Max I(ol) | 0.05 A |
| Prop. Delay@Nom-Sup | 9.5 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC157PWR Overview
Digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width) for the purpose of saving board space.The package is in the form of Cut Tape (CT).Digital switch ic uses a Surface Mount mounting method.In the multiplexers, the analog IC is indicated by Multiplexer.If the operating temperature is maintained at -40°C~125°C, turn signal switch will not be susceptible to external factors.The turn signal switch is designed for use with a 2V~5.5V supply voltage, which gives it a lot of flexibility.The multiplexers from 74AHC series can be used for a wide range of applications.This configuration includes 16 terminations as part of its basic functionality.You can also find related parts by using its logic switch base part number of 74AHC157.The multiplexer's system is powered by 3.3V voltage.This turn signal switch has a total of 16 component pins.As a result, conductors end at GULL WING.Single is used as its supply type.There are 16 pins on it.The mounting is in the way of Surface Mount.The logic switch is a member of the family of AHC/VHC/H/U/V.In this signal multiplexer, there are 2 bits that are provided.It is recommended that the minimum supply voltage (Vsup) be kept at 2V so that unnecessary failures can be prevented.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.As part of the operation of this turn signal switch, there are 1 outputs.It is provided with 8 inputs.A TR packaging method is used in the switches.A total of 4 transmission channels are available in the turn signal switch's circuit.
SN74AHC157PWR Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
SN74AHC157PWR Applications
There are a lot of Texas Instruments SN74AHC157PWR Signal Switches / Multiplexers / Decoders applications.
- Enabling block of memory depending on address in memory chips
- Textile mills
- Frequency multiplexing system
- Solenoid cooling fan
- To select different devices in microprocessor output
- Encrypted communications system
- Home automation system
- Paper plants
- Video transmission
- Night vision cameras
