SN74AHC157PWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AHC157 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Propagation Delay | 8.4 ns |
| Family | AHC/VHC/H/U/V |
| Number of Inputs | 8 |
| Current - Output High, Low | 8mA 8mA |
| Supply Type | Single |
| Bandwidth | 110MHz |
| Output Polarity | TRUE |
| Prop. Delay@Nom-Sup | 9.5 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.15mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC157PWRG4 Overview
Providing this information in the 16-TSSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.The package is packaged in accordance with Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.For the analog part of the multiplexers, an IC Multiplexer is used.In the case of -40°C~125°C, turn signal switch will not be affected by external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 2V~5.5V.provides digital controlled switch's digital controlled switch'sMultiplexers from the 74AHC series can be used in a wide range of applications.There is a design for terminating 16 as part of its basic configuration.To find signal switch's related components, a base part number of 74AHC157 may also be used.The turn signal switch is supplied with a voltage of 3.3V volts.This turn signal switch contains 16 component pins.Conductors terminate at GULL WING in this design.In this case, the supply type is Single.There are 16 pins on it.It is mounted in the way of Surface Mount.The logic switch is a member of the AHC/VHC/H/U/V family.As a result, signal multiplexer provides 2 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2V so that unnecessary failures can be prevented.Avoid unnecessary failures by keeping Vsup at 5.5V.The turn signal switch has 1 outputs designed for operation.A multiplexer such as this has 8 inputs available.TAPE AND REEL is used to package the switches.The turn signal switch's circuit consists of 4 channels that are being used for transmission in the circuit.
SN74AHC157PWRG4 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
SN74AHC157PWRG4 Applications
There are a lot of Texas Instruments SN74AHC157PWRG4 Signal Switches / Multiplexers / Decoders applications.
- Telephone network
- War field flying robot with a night vision flying camera
- Frequency multiplexing system
- LVDS
- Textile mills
- Implementing boolean functions with multiple variables
- VGA
- Communication system
- RF-based home automation system
- PCIe
