SN74AHC158DGVR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 41.900595mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AHC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AHC158 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 4 x 2:1 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Power Dissipation | 300mW |
| Number of Bits | 4 |
| Throw Configuration | DPST |
| Propagation Delay | 8.4 ns |
| Family | AHC/VHC/H/U/V |
| Current - Output High, Low | 8mA 8mA |
| Supply Type | Single |
| Max I(ol) | 0.008 A |
| Prop. Delay@Nom-Sup | 9.5 ns |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Width | 3.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC158DGVR Overview
Due to the fact that it is provided in the 16-TFSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.Cut Tape (CT) is the packaging method.Mounting is performed using Surface Mount.A digital IC Multiplexer is used as the analog component of the multiplexers.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 2V~5.5V supply voltage.The multiplexers from 74AHC series can be used for a wide range of applications.There are 16 terminations included in its basic configuration.The base part number is 74AHC158, so you can find its logic switch related parts using that number.In this case, 3.3V is the voltage supplied to the multiplexer's system.Signal switch has 16 component pins.As the end of conductors, it uses GULL WING.There is a supply type of Single employed as part of this supply.This multiplexer ic has 16 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the AHC/VHC/H/U/V family.The multiplexer ic provides 4 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2V.It is advisable that the maximal supply voltage (Vsup) remains at 5.5V to avoid some unnecessary failures.There are 1 outputs designed for the operation of the turn signal switch.In accordance with TAPE AND REEL, switches can be packaged.The multiplexers have 2 input lines used to accept voltage levels.
SN74AHC158DGVR Features
Supplied in the 16-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
2 input lines
SN74AHC158DGVR Applications
There are a lot of Texas Instruments SN74AHC158DGVR Signal Switches / Multiplexers / Decoders applications.
- To select different devices in microprocessor output
- Audio transmission
- Microprocessor input/output systems
- Relay
- Logic gates for other digital devices
- War field flying robot with a night vision flying camera
- Used to connect a single source to multiple destinations
- Data collection system
- Medical industry
- Code conversion
