SN74AHC158DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AHC158 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Power Dissipation | 300mW |
| Number of Bits | 2 |
| Throw Configuration | DPST |
| Propagation Delay | 8.4 ns |
| Family | AHC/VHC/H/U/V |
| Number of Inputs | 8 |
| Current - Output High, Low | 8mA 8mA |
| Supply Type | Single |
| Bandwidth | 110MHz |
| Max I(ol) | 0.05 A |
| Prop. Delay@Nom-Sup | 9.5 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC158DR Overview
For the purpose of saving board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).The package is packaged in accordance with Cut Tape (CT).In terms of mounting, digital switch ic uses the method of Surface Mount.The analog IC in the multiplexers is identified as Multiplexer.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.The turn signal switch is designed for use with a 2V~5.5V supply voltage, which gives it a lot of flexibility.Multiplexers in the 74AHC series are suitable for a wide range of applications.As part of its basic configuration, 16 terminations are designed as a part of it.The base part number is 74AHC158, which can also be used to find its logic switch related parts.The multiplexer's system is powered by 3.3V volts.This turn signal switch has a total of 16 component pins.GULL WING is used as the point at which the conductors come to an end as part of this formula.Single is employed as its supply type.This multiplexer ic is configured with 16 pins.The mounting is in the way of Surface Mount.The AHC/VHC/H/U/V family includes the logic switch.In the signal multiplexer, there are 2 bits available.To avoid unnecessary failures, keep the supply voltage at 2V (Vsup).Keeping Vsup at 5.5V will prevent some unnecessary failures.The turn signal switch operates with 1 outputs.It has 8 inputs.The switches package is packaged in accordance with the TR method.This turn signal switch's circuit is based on a circuit with 4 channels.
SN74AHC158DR Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
SN74AHC158DR Applications
There are a lot of Texas Instruments SN74AHC158DR Signal Switches / Multiplexers / Decoders applications.
- War field flying robot with a night vision flying camera
- Telephone network
- Implementing boolean functions with multiple variables
- Electronically controlled engine system
- Enabling different rows of memory depending on address in memory chips
- Code conversion
- Transmission from the computer system of a satellite
- Frequency multiplexing system
- Electronic circuits
- LVDS
