SN74AHC158NSR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74AHC |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74AHC158 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Propagation Delay | 8.4 ns |
| Family | AHC/VHC/H/U/V |
| Current - Output High, Low | 8mA 8mA |
| Supply Type | Single |
| Bandwidth | 110MHz |
| Output Polarity | INVERTED |
| Max I(ol) | 0.008 A |
| Prop. Delay@Nom-Sup | 9.5 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
SN74AHC158NSR Overview
In order to save board space, digital switch is located in the 16-SOIC (0.209, 5.30mm Width).The package is in the form of Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.Multiplexer is the analog IC that the multiplexers uses.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.The turn signal switch is designed for use with a 2V~5.5V supply voltage, which gives it a lot of flexibility.Several applications are possible for 74AHC series multiplexers.There are 16 terminations included in its basic configuration.You can also find related parts by using its logic switch base part number of 74AHC158.The multiplexer's system is supplied with a voltage of 3.3V.This turn signal switch has 16 component pins.As the end of conductors, it uses GULL WING.Its supply type is Single, which is used as the source of power.Currently, it is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.There is a family of AHC/VHC/H/U/V members.In the signal multiplexer, there are 2 bits available.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 2V.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.The turn signal switch has 1 outputs designed for operation.The switches package is packaged in a way which is consistent with TAPE AND REEL.
SN74AHC158NSR Features
Supplied in the 16-SOIC (0.209, 5.30mm Width) package
Adopting a supply type of Single
SN74AHC158NSR Applications
There are a lot of Texas Instruments SN74AHC158NSR Signal Switches / Multiplexers / Decoders applications.
- Textile mills
- VGA
- Solenoid cooling fan
- Frequency multiplexing system
- Image transmission
- Medical industry
- Steel plants
- Data communication
- Communication system
- Home automation system
