banner_page

SN74AHC158PW

16 Terminations2V~5.5V 16 Pin 74AHC158 Signal switch74AHC Series 1 Outputs4 Functions


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74AHC158PW
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 233
  • Description: 16 Terminations2V~5.5V 16 Pin 74AHC158 Signal switch74AHC Series 1 Outputs4 Functions(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Weight 61.887009mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 74AHC
JESD-609 Code e4
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Type Multiplexer
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Technology CMOS
Voltage - Supply 2V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Base Part Number 74AHC158
Pin Count 16
Number of Outputs 1
Circuit 4 x 2:1
Supply Voltage-Max (Vsup) 5.5V
Supply Voltage-Min (Vsup) 2V
Number of Channels 4
Load Capacitance 50pF
Number of Bits 2
Propagation Delay 8.4 ns
Family AHC/VHC/H/U/V
Number of Inputs 8
Current - Output High, Low 8mA 8mA
Supply Type Single
Bandwidth 110MHz
Output Polarity INVERTED
Prop. Delay@Nom-Sup 9.5 ns
Voltage Supply Source Single Supply
Independent Circuits 1
Length 5mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74AHC158PW Overview


Due to the fact that it is provided in the 16-TSSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.Tube represents its packaging.digital switch ic uses the method of Surface Mount for mounting.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.With a supply voltage of 2V~5.5V, designers have greater flexibility of digital controlled switch.Multiplexers in the 74AHC series are suitable for a wide range of applications.Its basic configuration includes terminations in the 16 range.In addition, it also has a base part number of 74AHC158, which can be used to find related parts.In this case, 3.3V is the voltage supplied to the multiplexer's system.A component pin count of 16 is found on this turn signal switch.It is the end of conductors that is represented by GULL WING.The supply type of this multiplexer ic is Single.With 16 pins, it is configured.The mounting point is Surface Mount.There is a family of AHC/VHC/H/U/V members.There are 2 bits signal multiplexer provides.Keeping Vsup at 2V will prevent some unwanted failures.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V in order to prevent some unnecessary failures.There are 1 outputs designed to operate the turn signal switch.The multiplexer provides 8 inputs.The turn signal switch's circuit has 4 transmission channels.

SN74AHC158PW Features


Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single

SN74AHC158PW Applications


There are a lot of Texas Instruments SN74AHC158PW Signal Switches / Multiplexers / Decoders applications.

  • PCIe
  • Arithmetic Logic Units
  • Injectors
  • Paper plants
  • Data communication
  • Microprocessor memory systems
  • Communication system
  • Code converters
  • Telephone network
  • Frequency multiplexing system

Write a review

Note: HTML is not translated!
    Bad           Good