SN74AHC158PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Base Part Number | 74AHC158 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Power Dissipation | 300mW |
| Number of Bits | 2 |
| Throw Configuration | DPST |
| Propagation Delay | 8.4 ns |
| Family | AHC/VHC/H/U/V |
| Number of Inputs | 8 |
| Current - Output High, Low | 8mA 8mA |
| Supply Type | Single |
| Bandwidth | 110MHz |
| Max I(ol) | 0.05 A |
| Prop. Delay@Nom-Sup | 9.5 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC158PWR Overview
In order to save board space, digital switch is located in the 16-TSSOP (0.173, 4.40mm Width).The package is in the form of Cut Tape (CT).Digital switch ic adheres to a mounting method of Surface Mount.In the multiplexers, the analog IC is indicated by Multiplexer.The operating temperature of -40°C~85°C will not be susceptible to external factors.The turn signal switch is designed for use with a 2V~5.5V supply voltage, which gives it a lot of flexibility.Multiplexers in the 74AHC series are suitable for a wide range of applications.Among its basic configurations are 16 terminations.There is a base part number 74AHC158 that can be used to locate signal switch's related components as well.The multiplexer's system is powered by 3.3V voltage.Signal switch has 16 component pins.As a result, GULL WING represents the end of the conductors.As a type of supply, Single is employed.A total of 16 pins are configured on this board.This unit is mounted in the way of Surface Mount.I would like to refer to the logic switch as a member of the AHC/VHC/H/U/V family.Signal multiplexer provides 2 bits.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 2V.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 5.5V.In order for the turn signal switch to work, there are 1 outputs.It is provided with 8 inputs.A TR packaging method is used in the switches.For transmission, there are 4 channels in the turn signal switch's circuit.
SN74AHC158PWR Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
SN74AHC158PWR Applications
There are a lot of Texas Instruments SN74AHC158PWR Signal Switches / Multiplexers / Decoders applications.
- PCIe
- Night vision cameras
- Enabling block of memory depending on address in memory chips
- War field flying robot with a night vision flying camera
- Data-routing applications
- VGA
- Idle motor
- Make half adder
- D/A converters
- Enabling different rows of memory depending on address in memory chips
