SN74AHC16244DGGR
| Parameters | |
|---|---|
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74AHC16244 |
| Pin Count | 48 |
| Output Type | 3-State |
| Number of Elements | 4 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 4 |
| Propagation Delay | 8 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 13.5 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Buffer, Inverting |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | Buffer, Non-Inverting |
| Max I(ol) | 0.008 A |
| Prop. Delay@Nom-Sup | 8.5 ns |
| Control Type | ENABLE LOW |
| Number of Input Lines | 16 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Additional Feature | WITH DUAL OUTPUT ENABLE |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
SN74AHC16244DGGR Overview
Logical driver uses a neat 48-TFSOP (0.240, 6.10mm Width) package. Cut Tape (CT) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 2V~5.5V. Qualified to operate within -40°C~125°C TA. The high and low logic state output current of logical driver is 8mA 8mA. Logical driver can deal with 3-State output (s). All of the 4 elements are put into use. Digital buffer is one of the 74AHC series devices. 48 terminations with different functions. Buffer IC reuqires a supply voltage of 3.3V. This logical driver is a member of the AHC/VHC/H/U/V family. 48 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 48 pins. Enhanced with 2 ports. You can search "74AHC16244" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 4μA. It is recommended to use a 2/5.5V power supply. It is generally sold in TR package. To supply the device, a minimum voltage of 2V is a must. 4 bits are included within the electrical component. Logical driver features WITH DUAL OUTPUT ENABLE to better serve the need. Because of its 16 lines level input capability, buffer IC is more cost-effective on transimitting signals.
SN74AHC16244DGGR Features
Bus Driver/Transceivers
WITH DUAL OUTPUT ENABLE
SN74AHC16244DGGR Applications
There are a lot of Texas Instruments SN74AHC16244DGGR Buffers & Transceivers applications.
- TV signal transmission
- Remote controls
- Fast Ethernet
- Military satellite communications
- transmission relay
- Broadcast application
- Sensor reporting
- Tuner
- Point-to-point networking
- Car radio
