SN74AHC16373DGGR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74AHC16373 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Number of Elements | 2 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 17 ns |
| Turn On Delay Time | 1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.008 A |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 1 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74AHC16373DGGR Overview
It is embedded in the 48-TFSOP (0.240, 6.10mm Width) package. Cut Tape (CT) is the way in which it is packaged. It uses Tri-State as the output. There is a logic type of D-Type Transparent Latch for this electrical device. Based on the way of Surface Mount, this electronic part is mounted. There is no supply voltage for this device. During operation, the temperature is set at -40°C~85°C. An FPGA of this type belongs to the 74AHC series. With this electronic part, there are 16 bits. In this device, there are 48 terminations that have been designed. The family it belongs to is 74AHC16373. A 3.3V voltage supply is required for operation. 48 pins are provided. This electronic device belongs to the family of AHC/VHC/H/U/V. There are 48 pins on it. Surface Mount is the way in which this electronic part is mounted. 2 ports are available on this device. Subcategory Bus Driver/Transceiver includes this part. 5.5V is the maximum supply voltage (Vsup). If the supply voltage (Vsup) is greater than 2V, then the device is working correctly. In the circuit, there are 3 input lines that are constituted by an electronic circuit. Based on its reliable performance, this device is well suited to TR. Regardless of the input line, the binary equivalent of the input line will be generated by the 1 output lines. It consists of 2 elements. In order for the device to operate at its maximum power, the maximum power current (ICC) of 0.04mA is needed for operation.
SN74AHC16373DGGR Features
48-TFSOP (0.240, 6.10mm Width) package
74AHC series
16 Bits
74AHC16373 family
48 pin count
48 pins
2 elements
SN74AHC16373DGGR Applications
There are a lot of Texas Instruments SN74AHC16373DGGR Latches applications.
- Pattern Generators
- Pattern generators
- Relay
- Digital bus buffer
- Shift right with parallel loading
- General-Purpose Register
- High-speed logic
- Parallel Input
- Automotive Infotainment
- Parallel Output
