banner_page

SN74AHC16373DLG4

D-Type, Latch 8 Bits Latches 48 Pins DUAL CMOS SSOP


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74AHC16373DLG4
  • Package: SSOP
  • Datasheet: -
  • Stock: 513
  • Description: D-Type, Latch 8 Bits Latches 48 Pins DUAL CMOS SSOP(Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case SSOP
Number of Pins 48
Weight 600.301152mg
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 48
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory FF/Latches
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 3.3V
Terminal Pitch 0.635mm
Pin Count 48
Number of Elements 2
Polarity Non-Inverting
Temperature Grade INDUSTRIAL
Max Supply Voltage 5.5V
Min Supply Voltage 2V
Load Capacitance 50pF
Number of Ports 2
Number of Bits 8
Propagation Delay 17 ns
Turn On Delay Time 1 ns
Family AHC/VHC/H/U/V
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
Max I(ol) 0.008 A
Prop. Delay@Nom-Sup 10.5 ns
High Level Output Current -8mA
Low Level Output Current 8mA
Control Type ENABLE LOW/HIGH
Power Supply Current-Max (ICC) 0.04mA
Number of Input Lines 16
Count Direction UNIDIRECTIONAL
Translation N/A
Height 2.59mm
Length 15.88mm
Width 7.49mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

SN74AHC16373DLG4 Overview


There is an embedded version of it in package SSOP. With this electronic part, there are 8 bits. This device has been designed with 48 terminations available. With the supply voltage set at 3.3V, it is able to operate. 48 pins are provided. In the world of electronics, this electronic device belongs to the family of AHC/VHC/H/U/V. 48 pins are used in its design. Surface Mount is the way in which this electronic part is mounted. This device has 2 ports. FF/Latches is the subcategory of this part. There are electronic circuits attached to the 16 input lines. The element count is 2. As its maximal power current (ICC) reaches 0.04mA, it is able to operate. In the low level output current, the value is set to 8mA. It has been set to -8mA for the high level output current. The operating temperature should be lower than 85°C. A temperature greater than -40°C should be used for operation. There is a maximum voltage supply of 5.5V that can be applied to it. With a minimum supply voltage of 2V, it operates. As far as the logic IC is concerned, it uses BUS DRIVER.

SN74AHC16373DLG4 Features


SSOP package
8 Bits
48 pin count
48 pins
2 elements

SN74AHC16373DLG4 Applications


There are a lot of Texas Instruments SN74AHC16373DLG4 Latches applications.

  • Serial Input
  • OC-48 communication systems
  • Automotive Cluster
  • Counting
  • High-speed logic
  • Automotive Body Electronics
  • TV Set-top Boxes
  • Parallel Output
  • Storage
  • Serial Output Register

Write a review

Note: HTML is not translated!
    Bad           Good